Metallics JMPMP610 M6 x 10mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.26
$0.26
Metallics JMPMP610 M6 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP610 M6 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP610
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.26
$0.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Pan head with Phillips Drive
    • M6 Diameter, 10mm Length

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
10mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP610 – Frequently Asked Questions

1) Is the Metallics JMPMP610 a coarse thread M6 screw, and what pitch is it?
The JMPMP610 is an M6 screw with a 1 mm thread pitch, which is standard coarse metric for that diameter. It will thread into any M6 x 1 tapped hole or nut. If your equipment is tapped M6 x 0.75 fine thread, this is the wrong screw.
2) Do these screws qualify for a Buy American or ARRA-funded job?
No. The JMPMP610 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic-sourcing requirements you will need a domestically produced fastener instead.
3) What standard are these metric pan head Phillips machine screws made to?
They are built to ISO 1580, the dimensional standard for slotted and cross-recessed pan head metric machine screws. If a drawing or submittal calls out an ISO 1580 pan head M6, this meets that callout on head geometry.
4) Will a pan head sit flush, or do I need a flat head for a countersunk hole?
Pan head sits proud on the surface, it does not sink. The head on the JMPMP610 is 11.57 - 12 in dimension across the top with a head height of 3.3 - 3.6, so plan for the head standing above the panel. For a countersunk hole where nothing can protrude, use a flat head metric machine screw instead.
5) Are these zinc machine screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a dry-location and light-duty indoor coating. Zinc plating handles interior panel, box and device work well, but in wet, coastal or washdown locations it will corrode. For those, specify a stainless metric machine screw instead.
6) How strong are these M6 screws, and can I use them on a structural bracket?
Tensile strength is 420 N/mm2 minimum with a hardness of Rockwell B71-99.5, which is standard commercial-grade low-carbon steel, not a high-strength Class 8.8 or 10.9 fastener. Fine for mounting devices, brackets, covers and raceway inside an enclosure. For a load-bearing or vibration-critical structural connection, specify a graded metric bolt.
7) How do these Metallics M6 screws ship, and is there a minimum order?
They come packaged in a jar, with an order minimum of 100 count. So the smallest buy is a 100-piece jar rather than a loose single screw, which is how most MRO and electrical crews stock a fastener bin.
8) What driver bit do I need for these Metallics machine screws?
Phillips drive, cross recess. On an M6 pan head a #2 Phillips bit is the normal fit. There is no slotted, Torx or hex option in the MPMP series as supplied here.
9) Can I get the same screw in a different length or diameter?
The MPMP pan head Phillips line runs in other metric sizes and pack quantities beyond the M6 x 10, available by request. If your job needs M6 x 20 or an M4, ask for the matching MPMP size rather than mixing in an inch-thread screw, since M6 x 1 will not interchange with 1/4-20.
How fast can I get the Metallics JMPMP610 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP610 come with a warranty?
Absolutely. The Metallics JMPMP610 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP610?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP610 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!