Metallics JMPMP616 M6 x 16mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.46
$0.46
Metallics JMPMP616 M6 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP616 M6 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP616
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.46
$0.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • M6 Diameter, 16mm Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
16mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.25 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP616 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP616 M6 machine screws have, and will they fit a standard M6 nut or tapped hole?
The JMPMP616 is an M6 screw with a 1.0 mm thread pitch, which is the standard coarse metric pitch for M6. It threads into any M6 x 1.0 tapped hole or nut. If your enclosure or strut is tapped in inch sizes (10-24, 1/4-20), these will not engage; metric thread only.
2) Do the Metallics JMPMP616 screws meet Buy American or ARRA requirements for a government job?
No. The JMPMP616 is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your project has domestic-content requirements, you need a domestically sourced fastener.
3) Is the JMPMP616 made to a recognized metric dimensional standard?
Yes, the pan head Phillips screw is built to ISO 1580, the metric standard covering slotted/pan head machine screws, so head and thread geometry match other ISO 1580 M6 screws from any maker.
4) How many M6 x 16mm Metallics pan head screws come in a pack?
They ship in a jar of 100 pieces, and 100 is the order minimum. One jar is the smallest quantity you can buy.
5) Are these zinc plated steel screws strong enough for mounting panels and device boxes?
The steel screws are zinc plated and rated at 420 N/mm2 minimum tensile strength with a hardness of Rockwell B71 to 99.5. That is standard commercial-grade machine screw material, fine for mounting enclosures, panels, straps and device hardware. For structural or high-load connections, step up to a higher property class fastener.
6) Will zinc plated screws hold up outdoors or in a wet location?
Zinc plating is a mild corrosion barrier meant for dry indoor use. For exterior, damp, or washdown locations, specify stainless steel M6 x 16mm screws instead of this zinc plated steel version.
7) Why a pan head Phillips screw rather than a flat head for panel mounting?
A pan head sits on top of the surface with a rounded crown and a broad bearing face, so it works on untapered through-holes and spreads load on sheet metal. A flat head needs a countersunk hole to sit flush. The JMPMP616 uses a Phillips drive, so it drives with a standard Phillips bit, no specialty driver.
8) What trades use the Metallics MPMP pan head machine screws?
They are stocked for electrical, plumbing, heating and air conditioning work, typical uses being device and plate mounting, enclosure covers, strap and bracket fastening where a metric thread is called for.
How fast can I get the Metallics JMPMP616 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP616 come with a warranty?
Absolutely. The Metallics JMPMP616 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP616?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP616 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!