Metallics JMPMP640 M6 x 40mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.59
$0.59
Metallics JMPMP640 M6 x 40mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP640 M6 x 40mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP640
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.59
$0.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 40mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Steel Zinc Material
    • Pan head with Phillips Drive
    • M6 Diameter, 40mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
40mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.27 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP640 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP640 M6 screws have, and will they thread into a standard M6 tapped hole?
Thread pitch is 1.0mm, which is the standard coarse M6 pitch. So they thread into any normal M6 x 1 tapped hole or M6 nut. If your equipment uses a fine-pitch M6 x 0.75, these will not engage.
2) Are the JMPMP640 machine screws metric or imperial thread?
Metric. They are M6 diameter, 40mm long, built to ISO 1580 for pan head dimensions. They will not fit a 1/4-20 or 10-32 hole, so if your panel or enclosure is tapped in inch threads you need an imperial machine screw instead.
3) How many M6 x 40mm pan head Phillips screws come in a pack, and how are they packaged?
They ship 100 to a jar, and 100 count is the order minimum. Metallics notes other sizes and quantities are available by request.
4) Is zinc plated steel good enough for outdoor or damp electrical work?
The JMPMP640 is zinc plated steel, which is a mild corrosion barrier meant for dry indoor use, interior enclosures, panel and device mounting. For exterior, wet locations or coastal exposure, go with stainless rather than zinc plated steel.
5) Should I use a pan head or a flat head machine screw for mounting inside an enclosure?
Pan head, like the M6 x 40mm JMPMP640, sits on the surface with a rounded low profile and needs no countersink, so it works on flat sheet steel, brackets and device plates drilled with a plain through hole. Flat head only makes sense when the hole is countersunk and you need the head flush with the surface.
6) What driver do I need for the Metallics JMPMP640 screws?
A Phillips bit. The head is a pan head with a Phillips recess, so a standard Phillips screwdriver or driver bit seats it. No Torx or square drive bit needed.
7) Do these Metallics screws come with nuts or washers?
No. The JMPMP640 jar is machine screws only, 100 of them. If the joint needs M6 hex nuts, flat washers, or lock washers, order those separately in M6 to match the 1.0mm pitch.
8) What is the country of origin on the Metallics JMPMP640 screws? I have procurement paperwork to fill out.
Country of origin is China. The dimensional standard called out for the head geometry is ISO 1580, which is what to reference if your submittal asks for a conformance standard.
How fast can I get the Metallics JMPMP640 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP640 come with a warranty?
Absolutely. The Metallics JMPMP640 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP640?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP640 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!