Metallics JMPMP430 M4 x 30mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JMPMP430 M4 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP430 M4 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP430
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M4 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • M4 Diameter, 30mm Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
U
Buy American Compliant:
U
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
2.26 - 2.4 in.
Fastener Head Type:
Pan
Fastener Head Width:
7.64 - 8 in.
Fastener Length:
30mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.58 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.7
Thread Type:
UNC
Wall Thickness:
1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP430 – Frequently Asked Questions

1) Is the Metallics JMPMP430 screw metric or imperial thread?
It's metric. The JMPMP430 is an M4 screw with a 0.7 mm thread pitch, which is the standard coarse pitch for M4. It will not thread into a tapped 8-32 or any inch hole, so if your enclosure or device is tapped in inch threads you need an imperial machine screw instead.
2) How many M4 x 30mm Metallics pan head screws come in a pack?
They come 100 to a jar, and 100 count is the order minimum, so the smallest buy is one jar of 100.
3) What size Phillips driver do I need for these M4 pan head machine screws?
A #2 Phillips. The recess on the JMPMP430 is a Phillips drive sized for a #2 bit, which is what you'll already have in the pouch for device and plate screws.
4) Will a pan head screw sit flush, or does the head stand proud of the surface?
Pan head, so the head sits on top of the surface rather than sinking in. The JMPMP430 is not countersunk; if you need the head flush with a panel face, use a flat head screw in a countersunk hole instead.
5) What dimensional standard do these Metallics metric pan head screws conform to?
ISO 1580, the metric standard for slotted/pan head screw dimensions. That matters if you're matching head geometry to a spec on a drawing or standardizing fasteners across an electrical build.
6) Are these M4 x 30mm screws strong enough for structural or just light fastening?
The steel is rated at 420 N/mm2 minimum tensile with a hardness of Rockwell B71 to 99.5. That is general-purpose carbon steel machine screw material, suited to fastening devices, enclosures, brackets and covers, not a substitute for a graded structural bolt.
7) Is zinc plated steel OK for outdoor or damp locations?
The JMPMP430 is steel with a zinc finish, which handles indoor and dry locations well. Zinc plating is a sacrificial coating, so in wet, coastal or washdown environments it will eventually corrode; specify stainless for those.
8) How much total grip length does a 30mm M4 machine screw give me?
Length is 30 mm measured under the pan head, so with a nut on the back you can clamp roughly that much combined material thickness less the nut and any thread engagement. For thinner stackups in the same M4 x 0.7 thread, step down to a shorter length in the same MPMP series.
9) Can I get the M4 pan head screw in other lengths or larger quantities?
Yes. Metallics lists other sizes and quantities in the MPMP metric pan head line by request, so if 30 mm is too long or you need bulk beyond the 100 count jar, ask for the size you need.
10) Is the Metallics JMPMP430 made in the USA or Buy American compliant?
Country of origin is listed as multiple, and both Buy American and ARRA compliance are flagged as undetermined. For a federal or publicly funded job with a domestic sourcing clause, treat this as not qualifying and source a documented domestic fastener.
11) How much does a jar of 100 M4 x 30mm pan head screws weigh for shipping?
The 100 count jar weighs 0.58 lbs and the jar measures 3 x 2.15 x 3 inches, so it drops easily into a van bin or a parts drawer.
How fast can I get the Metallics JMPMP430 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP430 come with a warranty?
Absolutely. The Metallics JMPMP430 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP430?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP430 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!