Metallics JMPMP46 M4 x 6mm Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.11
$0.11
Metallics JMPMP46 M4 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP46 M4 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP46
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.11
$0.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M4 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M4 Diameter, 6mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
2.26 - 2.4 in.
Fastener Head Type:
Pan
Fastener Head Width:
7.64 - 8 in.
Fastener Length:
6mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.36 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.7
Thread Type:
UNC
Wall Thickness:
1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP46 – Frequently Asked Questions

1) What thread does the Metallics JMPMP46 machine screw take, and will it fit an M4 tapped hole?
The JMPMP46 is an M4 metric screw with a 0.7 mm thread pitch, which is the standard coarse metric pitch for M4. It threads into any M4-0.7 tapped hole or nut. It is not an imperial screw, so it will not start in a #8-32 or 10-24 hole.
2) Is the M4 x 6mm pan head screw Buy American and ARRA compliant for a federal job?
Both compliance flags are marked compliant on the JMPMP46, ARRA and Buy American. Country of origin is listed as multiple, so if a specific-origin certification is required on your project, get documentation for the lot you receive.
3) What size Phillips driver do I need for these M4 screws?
A #2 Phillips bit. The JMPMP46 has a Phillips drive and the specified driver size is #2, so a standard #2 bit in a hand driver or a clutch-set cordless will seat properly without camming out.
4) What dimensional standard do these metric pan head screws conform to?
ISO 1580 is the governing standard for this screw, which is the spec for slotted/cross-recessed pan head metric machine screws. If your drawing calls out ISO 1580 pan head M4, this matches the head profile and dimensions that spec defines.
5) Will zinc plated steel hold up outdoors or in a damp mechanical room?
The finish is zinc plating over steel, which is a mild corrosion barrier intended for dry indoor use, enclosures, panels and conditioned spaces. In wet, washdown, coastal or chemical environments the plating will eventually give up and the steel will rust. For those openings specify stainless.
6) Why choose a pan head rather than a flat head screw for mounting a device or cover plate?
A pan head sits on top of the surface with a rounded crown and a broad flat bearing face, so it needs no countersink and spreads clamp load on sheet metal or plastic. The JMPMP46 is a pan head. If your part has a countersunk or chamfered hole and the fastener has to finish flush, you need a flat head screw instead, not this one.
7) How do these M4 screws come packaged and what is the minimum order?
They ship in a jar of 100, and 100 count is the order minimum. The jar weighs 0.36 lbs. Handy for a truck stock or a shop bench rather than a single-screw repair.
How fast can I get the Metallics JMPMP46 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP46 come with a warranty?
Absolutely. The Metallics JMPMP46 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP46?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP46 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!