Metallics JMPMP414 M4 x 14mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JMPMP414 M4 x 14mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP414 M4 x 14mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP414
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M4 x 14mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • M4 Diameter, 14mm Length
    • Steel Zinc Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.26 - 2.4 in.
Fastener Head Type:
Pan
Fastener Head Width:
7.64 - 8 in.
Fastener Length:
14mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.47 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.7
Wall Thickness:
1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP414 – Frequently Asked Questions

1) Is the Metallics JMPMP414 machine screw metric or imperial thread?
Metric. The JMPMP414 is an M4 screw with a 0.7 mm thread pitch, which is the standard coarse pitch for M4, and it is built to ISO 1580 for pan head dimensions. It will not thread into a 6-32 or 8-32 tapped hole, so if your enclosure or device is imperial-tapped you need an inch-series machine screw instead.
2) Is a zinc plated steel machine screw OK for outdoor or damp electrical work?
The JMPMP414 is zinc plated steel, which is a mild corrosion coating meant for dry indoor use, panels, enclosures, and device mounting. For wet locations, exterior work, or anywhere washdown or salt is involved, specify a stainless machine screw instead; zinc plating on steel will eventually rust through in those conditions.
3) How many M4 x 14mm Metallics pan head screws come in a jar?
They ship 100 to a jar, and 100 count is the order minimum. Total packed weight is 0.47 lbs, so it is a small container you can keep on the truck rather than a bulk box.
4) Will a Phillips pan head M4 screw sit flush, or does the head stand above the surface?
A pan head sits on top of the surface, not in it. The JMPMP414 has a rounded pan head with a Phillips drive built to ISO 1580 proportions, so there is no countersink prep needed, but the head does protrude. If you need the fastener flush with the plate or panel, use a flat head countersunk screw and a chamfered hole instead.
5) Does the Metallics JMPMP414 screw meet Buy American or ARRA requirements for a government job?
The JMPMP414 is flagged compliant for both ARRA and Buy American, with country of origin listed as China. On federally funded work where the specifying authority requires domestic melt and manufacture rather than the compliance flag, confirm which standard your contract is written to before you submit it.
6) What driver bit fits the Metallics M4 pan head machine screw?
It takes a Phillips bit. On an M4 pan head built to ISO 1580 the recess is a PH2, which is the bit most electricians already have in the pouch. Use a properly seated PH2 to avoid camming out the recess on zinc plated steel.
How fast can I get the Metallics JMPMP414 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP414 come with a warranty?
Absolutely. The Metallics JMPMP414 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP414?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP414 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!