Metallics JMPMP48 M4 x 8mm Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics JMPMP48 M4 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP48 M4 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP48
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M4 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • M4 Diameter, 8mm Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.26 - 2.4 in.
Fastener Head Type:
Pan
Fastener Head Width:
7.64 - 8 in.
Fastener Length:
8mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.39 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.7
Wall Thickness:
1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP48 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP48 M4 screws use, and will they thread into a standard M4 tapped hole?
Thread pitch is 0.7 mm, which is the standard coarse M4 pitch, so the JMPMP48 threads into any standard M4 tapped hole or M4 nut. Overall length under the head is 8 mm, so usable thread is short, meant for thin material or shallow tapped holes.
2) Are these metric or imperial machine screws? I need M4, not 8-32.
These are metric. The JMPMP48 is an M4 diameter screw with a 0.7 mm pitch, built to ISO 1580 for metric pan head screws. It will not thread into an 8-32 or 6-32 imperial hole.
3) Do these Metallics M4 screws qualify as Buy American on a federal job?
No. The JMPMP48 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project carries a domestic-content requirement, this screw will not satisfy it.
4) How many M4 x 8mm pan head screws come in a jar, and can I buy just a few?
They ship in a jar of 100, and 100 is the order minimum, so it is a full jar rather than a loose count. Other sizes and quantities are available by request.
5) Will a pan head Phillips screw sit flush in a device plate or do I need an oval or flat head?
Pan head screws seat on top of the surface, not down into it. The JMPMP48 has a pan head with a Phillips drive, so the head crowns above the panel or plate face. If you need the head to disappear into a countersunk hole, you want a flat or oval head instead.
6) Are zinc plated steel M4 screws OK for outdoor or wet locations?
Zinc plated steel is a dry, indoor-duty finish. The JMPMP48 is steel with a zinc finish, which handles normal enclosure and panel work but will corrode in wet, washdown, or coastal exposure. For those, use stainless.
7) How strong are these M4 machine screws? Can I use them on a mechanical bracket?
Tensile strength is rated 420 N/mm2 minimum with a hardness of Rockwell B71 to 99.5. That is standard commercial-grade carbon steel fastener strength, fine for enclosure covers, brackets, straps and device mounting. It is not a high-tensile structural screw, so do not substitute it where a graded or socket-head fastener is specified.
8) What trades actually use the Metallics MPMP series M4 pan head screws?
The MPMP series is stocked for the electrical, plumbing, and heating and air conditioning trades. Typical use is fastening covers, plates, straps, and small components into tapped metric holes on equipment, which is where M4 shows up most on imported gear.
9) How much does a jar of 100 M4 x 8mm pan head screws weigh and how big is the container?
A jar of the JMPMP48 screws weighs 0.39 lbs, and the container measures 3 x 3 x 2.15 inches. Small enough to keep a couple of jars in a service bag.
How fast can I get the Metallics JMPMP48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP48 come with a warranty?
Absolutely. The Metallics JMPMP48 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP48?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!