Metallics JMPMP58 M5 x 8mm Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.21
$0.21
Metallics JMPMP58 M5 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP58 M5 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP58
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.21
$0.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 8mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M5 Diameter, 8mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
8mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.66 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP58 – Frequently Asked Questions

1) Is the Metallics JMPMP58 machine screw a metric M5 x 0.8 thread?
Yes. The JMPMP58 is an M5 diameter screw, 8mm long, with a 0.8mm thread pitch, which is the standard coarse metric pitch for M5. It is a machine screw, so it threads into a tapped hole or a nut, not into wood or sheet metal. If your enclosure or fixture is tapped M5 x 0.8, this screw mates with it.
2) What dimensional standard do these Metallics metric pan head screws conform to?
They are built to ISO 1580, the metric standard for slotted/cross-recessed pan head screws. That matters if you are matching a European-spec enclosure or a drawing that calls out ISO 1580 head geometry, because the head diameter and height are fixed by the standard rather than by the maker.
3) Are these zinc plated steel screws OK for outdoor or damp locations?
The material is zinc plated steel. Zinc plating is a mild corrosion barrier meant for dry indoor and protected service, panels, enclosures, and interior fixture work. For wet, washdown, coastal, or buried applications, specify stainless rather than zinc plated steel.
4) How are the Metallics JMPMP58 M5 screws packaged, and is there a minimum order?
They ship in a jar of 100, and 100 count is the order minimum. One jar covers a typical panel build or a service truck restock without loose-bag counting.
5) Do these screws need a Phillips driver, and what head profile do they have?
Phillips drive with a pan head. The pan head sits low with a flat underside and a rounded crown, so it bears on the surface rather than countersinking, which means no chamfered or countersunk hole prep is needed.
6) Do these Metallics machine screws meet Buy American and ARRA requirements for a federal job?
The Metallics MPMP metric pan head line is flagged as both ARRA compliant and Buy American compliant in the product record, with country of origin listed as China. For a federally funded project, verify which compliance clause your contract invokes, since origin and compliance flags are tracked separately.
7) What is the shipped weight of a 100 count jar of M5 x 8mm pan head screws?
A jar runs 0.66 lbs, with the container measuring 3 x 3 x 2.15 inches. Light enough to stack several sizes in a van bin or a job box drawer.
How fast can I get the Metallics JMPMP58 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP58 come with a warranty?
Absolutely. The Metallics JMPMP58 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP58?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP58 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!