You may also like
Masonry Drill Bit Carbide Fast Spiral Dia 3/8" 4 Shank 1/4" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics BFRS16 – Frequently Asked Questions
1) What size hole does the Metallics BFRS16 masonry bit drill, and will it fit my 1/4 inch chuck?
The BFRS16 is a 3/8 inch diameter carbide-tipped masonry bit with a 1/4 inch round shank, so it drops into any drill chuck that takes 1/4 inch and up. Note the shank is smaller than the cutting diameter, which is normal on this style of bit. A 3/8 inch hole is the common size for 3/8 inch sleeve anchors and wedge anchors in concrete or block.
2) Can I use the Metallics BFRS16 masonry bit in a hammer drill or rotary hammer?
It has a plain 1/4 inch round shank, so it runs in a standard drill chuck or a hammer drill set to hammer mode with a keyed or keyless chuck. It is not an SDS-plus or SDS-max bit, so it will not go into a rotary hammer's SDS tool holder. For a rotary hammer you need an SDS-shank bit instead.
3) What materials is the Metallics BFRS16 carbide bit meant to drill?
It is a masonry bit, so it is for concrete, block, brick, mortar and stone. The carbide tip is what survives those materials. It is not a twist bit for steel and not a brad point for wood, so for metal boxes or lumber use the right bit for that material.
4) Why choose a fast spiral masonry bit over a standard flute?
The BFRS16 has a fast spiral flute, which has a steeper helix and clears dust out of the hole quicker. That matters on deeper holes and overhead work in concrete, where packed dust is what slows the bit and burns the carbide. For shallow holes in soft block the difference is minor.
5) Does the Metallics BFRS16 come as a single bit or a set?
One bit per pouch. The BFRS16 is sold as a single piece in a pouch, not as a multi-size kit, so order one per diameter you need or multiples if you are stocking a truck or shop.
6) What is the Metallics part number to reorder this 3/8 inch masonry bit?
Order it as Metallics BFRS16. That is the manufacturer part number for the 3/8 inch diameter, 1/4 inch shank carbide fast spiral masonry bit, and it is the only model under that designation, so there is no finish or length choice to specify.
How fast can I get the Metallics BFRS16 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BFRS16 come with a warranty?
Absolutely. The Metallics BFRS16 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BFRS16?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BFRS16 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.