You may also like
MC/AC CABLE TO STUD CLIP - 4 CABLES
Manufacturer Resources
Spec Sheet
Product Specs
- Idea Granular Category Code Igcc:
- 5028 >> Cable clips
- Product Group:
- Hangers, Supports & Fasteners
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Zinc Phosphate
- Type Of Cable:
- MC / AC Cable
- Department:
- Electrical
- Product Subgroup:
- Cable Support Systems
- Product Color:
- Silver
- Product Material:
- Steel
- Product Type:
- Cable Clip
- Country Of Origin:
- United States
Thomas & Betts SSF-CR4 – Frequently Asked Questions
1) How many MC or AC cables does the Thomas & Betts SSF-CR4 stud clip hold?
The SSF-CR4 holds four MC/AC cables in one clip. It's a steel cable clip made for routing armored cable along metal studs, so one fastener handles a four-cable run instead of strapping each cable separately.
2) Can I use the SSF-CR4 clip for Romex or NM cable instead of MC?
No. The SSF-CR4 is specified for MC/AC (armored) cable only. For nonmetallic sheathed cable you need a clip or staple rated for NM, since the clip geometry is sized to the spiral armor profile, not flat NM jacket.
3) Is the SSF-CR4 cable clip coated for corrosion resistance?
It's steel with a zinc phosphate surface finish, silver in appearance. Zinc phosphate is a conversion coating suited to dry interior work such as stud-wall branch circuit runs; it isn't a hot-dip galvanized or stainless part, so for wet or exterior locations choose a clip rated for that environment.
4) Do I need screws or a tool to install the SSF-CR4 MC cable clip?
The SSF-CR4 is a push-on steel clip that snaps onto the metal stud and captures the cables, so no screws, anchors or anvil tool are part of the clip itself. If you're hanging cable off wood framing or concrete instead of steel studs, this isn't the right support type.
5) Is the SSF-CR4 clip made in the USA for a Buy American spec job?
Country of origin on the SSF-CR4 is the United States. That's the data point procurement officers on federally funded or Buy American jobs usually need; confirm the specific program's domestic content thresholds against the manufacturer's spec sheet for the submittal.
6) What's the correct part number to order a 4-cable MC stud clip from Thomas & Betts?
SSF-CR4 is the manufacturer part number for the four-cable MC/AC to stud clip. The CR number in the Steel City SSF series tracks cable capacity, so quote SSF-CR4 when your takeoff calls for four armored cables per support point.
7) Is the Thomas & Betts SSF-CR4 sold individually or in a box?
The selling unit of measure on the SSF-CR4 is each, so you buy it per clip and can order the exact count your cable run needs rather than a fixed carton.
How fast can I get the Thomas & Betts SSF-CR4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts SSF-CR4 come with a warranty?
Absolutely. The Thomas & Betts SSF-CR4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts SSF-CR4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts SSF-CR4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.