You may also like
Panduit EDV10-250M-Q StrongHold Male Tab Disconnect, 10-12 AWG, Yellow Vinyl Insulated
Model: PAN-EDV10-250M-Q
Panduit EDV10-250M-Q StrongHold Male Tab Disconnect, 10-12 AWG, Yellow Vinyl InsulatedThe Panduit EDV10-250M-Q StrongHold Male Tab Disconnect is a professional terminal for 10-12 AWG conductors, with...
Panduit
$50.70
$10.80
Molex Hand Crimp Tool
The crimp tool is required for adding Molex terminals (connector pins) to wires used with
ElectroLynx® products. The tool is intended for low volume, or repair requirements only.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Hinges and Pivots
- Product Type:
- Wire Harnesses & Parts
- Commercial/Residential:
- Commercial
- Product Subgroup:
- Pivots and Pivot Sets
- Product Model:
- QC-MT2024
- Product Category:
- Door Hinges and Pivots
- Department:
- Door Hardware
McKinney QC-MT2024 – Frequently Asked Questions
1) What is the McKinney QC-MT2024 male terminal used for?
It's a Molex-style male crimp terminal (connector pin) sized for AWG 20-24 wire, used when terminating wire for McKinney ElectroLynx electrified hinge and harness connections. You crimp it onto the conductor to build or repair a connector end.
2) Do I need a special crimp tool for McKinney ElectroLynx Molex terminals?
Yes. A Molex hand crimp tool is required to attach these terminals to wire, and it is sold separately from the terminals themselves. McKinney describes that tool as intended for low volume or repair work rather than production harness building.
3) Will the QC-MT2024 terminal work on 18 gauge wire?
No. This pin is rated for AWG 20-24 conductors only. Heavier wire such as 18 AWG will not crimp reliably in the barrel, and you'd need a terminal sized for that gauge instead.
4) Is the QC-MT2024 a male or female pin, and does that matter?
It's the male terminal. Male and female pins are not interchangeable inside a Molex housing, so match the pin type to the connector half you are repairing. If the wire you're terminating plugs into a male housing, you need the female terminal instead.
5) I'm repairing one bad wire on an ElectroLynx harness. Do I have to replace the whole harness?
Not necessarily. McKinney supplies these terminals specifically so a connector pin can be added to a wire for repair work. Crimp a new QC-MT2024 onto the conductor with the Molex hand tool and seat it in the housing. For larger jobs or many terminations, a factory-made harness is the better route since the hand tool is meant for low volume or repair only.
6) Is this McKinney terminal suitable for commercial door openings?
It's a commercial-duty part, supplied for electrified door hardware work such as power transfer hinges and pivots on commercial openings rather than residential use.
How fast can I get the McKinney QC-MT2024 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the McKinney QC-MT2024 come with a warranty?
Absolutely. The McKinney QC-MT2024 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the McKinney QC-MT2024?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the McKinney QC-MT2024 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.