Milbank 200 Amp 1-Phase Ringle...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,424.46
Milbank U5098-XL-200S-KK-10GR 4 Terminal Ringless Small Closing Plate Horn Bypass 1-200 Ampere Main Breaker 520GR

Milbank 200 Amp 1-Phase Ringless Meter Socket with Main Breaker and Horn Bypass

(No reviews yet) Write a Review

Model: U5098-XL-200S-KK-10GR

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,424.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milbank 200 Amp 1-Phase Ringless Meter Socket with Main Breaker and Horn Bypass

Professional electrical metering solution with integrated main breaker protection

The Milbank 200 Amp 1-Phase Ringless Meter Socket delivers reliable electrical metering and distribution with integrated main breaker protection. This professional-grade meter socket features G90 galvanized steel construction with powder coat finish, Type 3R weatherproof rating, and horn bypass provision for versatile installation applications. The unit accommodates underground cable entry with 4-terminal configuration and includes one NEMA 5-20 ground fault receptacle for auxiliary power needs.

Professional Features & Benefits

  • 200 Continuous Ampere Rating: Provides robust capacity for residential and light commercial electrical service applications
  • Integrated Main Breaker Protection: One 200 ampere main breaker delivers essential overcurrent protection and service disconnect capability
  • Type 3R Weatherproof Enclosure: G90 galvanized steel with powder coat finish ensures reliable outdoor performance and corrosion resistance
  • Horn Bypass Provision: Enables flexible utility connection options and simplified meter installation procedures
  • Underground Cable Entry: Accommodates direct burial and conduit installations with appropriate wire range capacity
  • UL Listed Safety: Meets rigorous safety standards for reliable electrical distribution and metering applications
  • Ground Fault Receptacle: Includes one NEMA 5-20 ground fault receptacle for safe auxiliary power access

Technical Specifications

  • Amperage Rating: 200 Continuous Ampere
  • Application: Meter Socket
  • Brand Name: Milbank
  • Bypass Provision: Horn Bypass
  • Cable Entry: Underground
  • Departent: Electrical
  • Equipment Ground: 2 Barrel Ground Lug
  • Frequency Rating: 60 Hertz
  • Hub Closing Plate: Small Closing Plate
  • Insulation: Glass Polyester
  • Line Side Wire Range: 6 AWG - 350 kcmil
  • Load Side Wire Range: 1/0 AWG - 300 kcmil
  • Main Breaker Size: One 200 Ampere Main Breaker
  • Number Of Jaws: 4 Terminal
  • Number Of Main Breakers: 1
  • Number Of Meter Positions: 1 Position
  • Number Of Receptacles: 1
  • Phase: 1 Phase
  • Product Family Code: HPWR
  • Product Height: 32 IN
  • Product Length: 5.5 IN
  • Product Material: G90 Galvanized Steel with Powder Coat Finish
  • Product Mounting: Surface Mount
  • Product Size: 5.5L x 14W x32H
  • Product Type: Ringless Meter Socket
  • Receptacle Configuration: One NEMA 5-20 Ground Fault
  • Standard: UL Listed;Type 3R
  • Terminal: Lay in
  • Unspsc Number: 39121102
  • Voltage Rating: Up to 240 Volts Alternating Current
  • Width: 14 IN

Professional Applications

  • Residential electrical service installations
  • Small commercial and retail facilities
  • Multi-unit residential properties
  • Professional office buildings
  • Light industrial applications
  • Utility metering and distribution systems

Why Choose Milbank Quality?

Milbank delivers proven reliability through UL Listed safety certification, Type 3R weatherproof protection, and durable G90 galvanized steel construction with powder coat finish. The professional-grade materials and 60 Hertz frequency rating ensure dependable long-term performance in demanding electrical service applications.

Manufacturer Resources

Product Specs

Amperage Rating:
200 Continuous Ampere
Application:
Meter Socket
Brand Name:
Milbank
Bypass Provision:
Horn Bypass
Cable Entry:
Underground
Equipment Ground:
2 Barrel Ground Lug
Frequency Rating:
60 Hertz
Hub Closing Plate:
Small Closing Plate
Insulation:
Glass Polyester
Line Side Wire Range:
6 AWG - 350 kcmil
Load Side Wire Range:
1/0 AWG - 300 kcmil
Main Breaker Size:
One 200 Ampere Main Breaker
Number Of Jaws:
4 Terminal
Number Of Main Breakers:
1
Number Of Meter Positions:
1 Position
Number Of Receptacles:
1
Phase:
1 Phase
Product Family Code:
HPWR
Product Height:
32 IN
Product Length:
5.5 IN
Product Size:
5.5L x 14W x32H
Product Type:
Ringless Meter Socket
Receptacle Configuration:
One NEMA 5-20 Ground Fault
Standards:
UL Listed;Type 3R
Terminal:
Lay in
Unspsc Number:
39121102
Voltage Rating:
Up to 240 Volts Alternating Current
Product Material:
G90 Galvanized Steel with Powder Coat Finish
Product Mounting:
Surface Mount
Amps:
200
Product Width:
14 IN
Department:
Electrical
Product Subgroup:
Electrical
Product Group:
Metering & Service Entrance

Milbank U5098-XL-200S-KK-10GR – Frequently Asked Questions

1) Will a Milbank U5098-XL-200S-KK-10GR meter socket work on a 200 amp single phase 240 volt residential service?
That is exactly the service it is built for. The U5098-XL-200S-KK-10GR is rated 200 continuous amperes, 1 phase, 60 hertz, up to 240 volts AC, with one 200 ampere main breaker built in so the socket and the service disconnect are one enclosure. It is a 4 terminal socket, which is the standard jaw count for single phase three wire residential and light commercial service. One meter position only, so it serves a single account.
2) What size conductors can I land in this Milbank 200 amp meter socket, line and load side?
Line side lugs take 6 AWG through 350 kcmil, load side takes 1/0 AWG through 300 kcmil. Both are lay-in terminals, so you drop the conductor in rather than fishing it through a hole, which matters when you are working 4/0 aluminum SE or parallel-free 250 kcmil in a tight can. Equipment grounding lands on a 2 barrel ground lug. Typical 200 amp aluminum service entrance conductor sizes fall inside both ranges.
3) Is this Milbank socket set up for underground service or overhead?
Underground. The U5098-XL-200S-KK-10GR is configured for underground cable entry and ships with a small closing plate over the hub opening, not a weatherhead hub for an overhead drop. If the utility is bringing a lateral up out of the ground into the bottom of the can, this is the right configuration. For an overhead service drop you want a socket ordered with a hub for the size of conduit your utility specifies.
4) What is the difference between a ringless meter socket and a ring type, and which one does my utility want?
A ringless socket uses a full cover that lifts off over the meter and is secured with a utility seal, while a ring type uses a separate sealing ring clamped around the meter rim. They are not interchangeable, and the choice is set by the serving utility, not by the installer. The Milbank U5098-XL-200S-KK-10GR is ringless. If the utility's spec sheet calls for ring type, this can will be rejected at inspection.
5) Do I still need a separate main breaker panel if I use this Milbank meter socket?
Not for the service disconnect. The U5098-XL-200S-KK-10GR is a meter main, with one 200 ampere main breaker integrated in the same enclosure as the metering, so it serves as the service disconnect and overcurrent protection at the point of entry. Downstream you feed a main lug only panel, or a main breaker panel used as a subpanel, with grounds and neutrals separated at that point. This is the usual arrangement when the utility or the AHJ wants the disconnect outside.
6) What does horn bypass mean on a meter socket, and do I need it?
Horn bypass lets the utility keep the load energized while the meter is pulled, by making contact across bypass horns instead of breaking service. Many utilities require it on 200 amp residential and light commercial installs so meter changes do not drop the customer. Check your utility's approved meter socket list before ordering, because bypass style is one of the things they specify. The U5098-XL-200S-KK-10GR carries a horn bypass provision.
7) How much wall space do I need for this Milbank 200 amp meter main, and how does it mount?
Plan on 5.5 inches deep by 14 inches wide by 32 inches high. It is surface mount, so it fastens to the exterior wall or a mounting board rather than being recessed. Enclosure is G90 galvanized steel with a powder coat finish. Give yourself the working clearance in front that the code requires for the disconnect, since the main breaker lives in this can.
8) Can this Milbank meter socket be installed outdoors in the rain?
Yes, it is a Type 3R enclosure and UL Listed. Type 3R is the standard outdoor rating for service equipment, protecting against falling rain, sleet and external ice formation. The G90 galvanized steel body with powder coat finish handles the exposure. It is not rated for hosedown or washdown areas.
9) Does this Milbank meter main have a receptacle for a construction outlet?
It includes one NEMA 5-20 ground fault receptacle built into the enclosure. That is a 20 amp 125 volt GFCI outlet, which is what crews use for temporary power during construction and what a property manager can use for exterior equipment after the fact. One receptacle, not a pair.
10) Can this Milbank meter main feed more than one apartment or tenant?
Not on its own. It carries a single meter position, so it meters one account. For a duplex, fourplex or small commercial strip where each tenant is billed separately, you need a multi-position meter stack or ganged sockets, one position per tenant. This unit fits the single service application, including a house meter serving common area load on a multi-unit property.
11) What is the exact part number to order for a Milbank ringless 200 amp meter main with horn bypass and a GFCI receptacle?
Milbank U5098-XL-200S-KK-10GR. That is a single configuration: ringless, 4 terminal, small closing plate, horn bypass, one 200 ampere main breaker, underground entry, and one NEMA 5-20 GFCI receptacle. There are no finish or size options to specify, so the part number fully describes what arrives.
12) What insulates the jaws in this Milbank meter socket?
Glass polyester. That is the molded insulating base the meter jaws are set in, and it is what holds dielectric strength and dimensional stability through outdoor temperature swings and the heat a 200 amp continuous load puts through the jaw contacts. Relevant if you are specifying for a hot climate or a high continuous load service.
How fast can I get the Milbank U5098-XL-200S-KK-10GR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milbank U5098-XL-200S-KK-10GR come with a warranty?
Absolutely. The Milbank U5098-XL-200S-KK-10GR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milbank U5098-XL-200S-KK-10GR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milbank U5098-XL-200S-KK-10GR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!