Milwaukee 2235-20 Heavy-Duty T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$141.80
Milwaukee 2235-20 Heavy-Duty True-RMS 400 Amp Clamp Meter

Milwaukee 2235-20 Heavy-Duty True-RMS 400 Amp Clamp Meter

(No reviews yet) Write a Review

Model: 2235-20

In Stock (leaves warehouse same day if ordered before 3pm ET)

$141.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milwaukee 2235-20 Heavy-Duty True-RMS 400 Amp Clamp Meter

The Milwaukee 2235-20 Heavy-Duty True-RMS 400 Amp Clamp Meter is a professional-grade electrical clamp meter designed for accurate current and voltage measurement in demanding field conditions. Built around True-RMS measurement technology and a 400 Amp clamp capacity, this Milwaukee electrical clamp meter gives electricians and maintenance technicians the readings they need to diagnose circuits with confidence. The heavy-duty housing is constructed to stand up to the daily wear of commercial, industrial, and residential electrical work, making the 2235-20 a practical addition to any professional test equipment kit. Whether performing routine maintenance checks or diagnosing complex circuit issues, the 2235-20 provides the accuracy professionals expect from Milwaukee test instruments.

Key Features

  • True-RMS Measurement: Provides accurate readings on both linear and non-linear electrical loads, helping reduce measurement error common with average-responding meters.
  • 400 Amp Clamp Capacity: Rated for current measurement up to 400 Amp, supporting a wide range of electrical troubleshooting and diagnostic applications.
  • Heavy-Duty Construction: Rugged housing built to withstand drops, dust, and the daily demands of professional jobsite use.
  • Dedicated Clamp Meter Design: Purpose-built electrical clamp meter configuration for fast, non-contact current measurement without breaking the circuit.
  • Professional Diagnostic Tool: Suited for electricians, maintenance technicians, and electrical contractors who need dependable field measurements.
  • Milwaukee Test Equipment: Backed by the Milwaukee brand, a name relied on by trade professionals for durable, job-ready tools.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Electrical Troubleshooting
  • Circuit and Panel Diagnostics
  • Electrical Maintenance and Service Work
  • Professional Electrician Toolkits
  • New Construction and Renovation Electrical Testing

Why Milwaukee?

Milwaukee is recognized by trade professionals for building test equipment that holds up to the realities of daily jobsite use. The 2235-20 Heavy-Duty True-RMS 400 Amp Clamp Meter reflects that same commitment, pairing True-RMS accuracy with a heavy-duty build so electricians can rely on consistent, accurate readings call after call. Choose the Milwaukee 2235-20 for a dependable electrical clamp meter built to keep pace with professional electrical work.

Manufacturer Resources

Product Specs

list_batch:
MWK-20260918
Product Type:
Clamp Meter
Amperage Rating:
400A
Department:
Electrical
Product Subgroup:
Multimeters
Product Group:
Test & Measurement
Product Depth:
10.5 in
Product Material:
Polycarbonate With Rubber Overmold

Milwaukee 2235-20 – Frequently Asked Questions

1) What is the current measurement range on the Milwaukee 2235-20 clamp meter?
The Milwaukee 2235-20 clamps current up to 400 amps. That covers most branch circuits, panel feeders and motor loads on commercial and residential service work, but if you need to read a main feeder pulling more than 400 amps, step up to a higher-rated clamp.
2) Does the Milwaukee 2235-20 read True-RMS, or is it average-responding?
True-RMS. That matters when you're reading non-linear loads, VFDs, electronic ballasts, LED drivers, switching power supplies, where an average-responding meter will read low. On clean sine-wave loads both types agree; on distorted waveforms the 2235-20 gives you the real value.
3) Do I have to break the circuit to take a current reading with the 2235-20?
No. It's a clamp meter, so you jaw it around a single conductor and read current without opening the circuit or pulling wire out of a lug. That's the main reason to carry one over a plain multimeter for load checks on live panels.
4) Should I buy a clamp meter or a standard multimeter for panel troubleshooting?
Pick based on what you measure most. The 2235-20 is a dedicated clamp meter built for current first, reading load on a conductor without disconnecting anything, which is what panel and feeder diagnostics come down to. A standard multimeter needs the circuit broken and leads in series to read amps, and it tops out at a few amps on the fused input. If your day is load balancing, motor draw, and tracing which breaker is carrying what, the clamp is the right tool; if it's mostly continuity, resistance and bench-level voltage work, a handheld DMM is the simpler buy.
5) What is the Milwaukee part number for the 400 amp True-RMS clamp meter?
Order it as Milwaukee 2235-20. That is the manufacturer part number for the heavy-duty True-RMS 400 amp clamp meter, and it is sold as a single configuration, so there are no finish, range, or jaw-size options to specify on the order.
6) Is the Milwaukee 2235-20 tough enough for daily industrial jobsite use?
It's built for it. The 2235-20 uses a heavy-duty housing made to take drops and dust and the ordinary abuse of a tool that lives in a bag, and Milwaukee positions it for commercial, industrial and residential electrical work alike. For MRO and facility crews standardizing a kit, it's a field instrument rather than a bench one.
How fast can I get the Milwaukee 2235-20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 2235-20 come with a warranty?
Absolutely. The Milwaukee 2235-20 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 2235-20?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 2235-20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!