You may also like
MNTG CRADLE 1.75X.75IN BLACK NY SCR
Manufacturer Resources
Spec Sheet
Product Specs
- Idea Granular Category Code Igcc:
- 5065 >> Cable tie mounts
- Mounting Holes:
- #10
- Process Temperature Rating:
- -40 to +185 °F
- Product Group:
- Cable Management & Identification
- Product Type:
- Cable Tie Mount
- Selling Unit Of Measure:
- each
- Department:
- Electrical
- Product Subgroup:
- Cable Ties & Mounts
- Product Color:
- Black
- Installation Category:
- Screw
- Product Material:
- Nylon/Polyamide 6.6 Weather Resistant
- Country Of Origin:
- United States
Thomas & Betts TC5356 – Frequently Asked Questions
1) What size screw does the Thomas & Betts TC5356 cable tie mounting cradle take?
The TC5356 cradle mounts with a #10 screw through its mounting hole. It is a screw-applied mount, not adhesive backed, so you supply the fastener to suit the substrate (sheet metal screw into strut or panel, machine screw and nut through a drilled hole, or a #10 anchor into masonry).
2) Can this Thomas & Betts nylon cable tie cradle be used outdoors or in an unconditioned mechanical room?
Yes. The TC5356 is molded from weather resistant nylon/polyamide 6.6 in black, and black weather resistant nylon is the grade used for UV exposure. Its rated operating range is -40 to +185 degrees F, which covers outdoor rooftop runs, unheated attics, and boiler and mechanical rooms.
3) What is the TC5356 actually for, and how is it different from a plain cable tie mount?
It is a heavy duty mounting cradle for cable ties: a saddle that sits under the bundle, spreads the load across a wider footprint than a flat tie mount, and gives the tie a defined path. Screw fastened, so it holds bigger and heavier bundles than adhesive pads will. Use it where a run of conduit whips, armored cable, or a heavy wire bundle needs support off a panel or strut.
4) What are the footprint dimensions of the TC5356 cradle?
The TC5356 cradle measures 1.75 x .75 inches. Lay out your screw holes off that footprint when you are spacing cradles along a run.
5) Does the TC5356 come with cable ties or screws included?
No. The TC5356 is the cradle only, sold each. Order your cable ties separately, sized to the bundle diameter you are securing, and supply #10 screws or anchors for the mounting.
6) Can I order a single TC5356 cradle or do I have to buy a bag?
The TC5356 is sold each, so you can order exactly the count the job needs rather than a full pack. Part number is TC5356 from Thomas & Betts.
7) Will this cable tie cradle hold up in a freezer or cold storage space?
Down to -40 degrees F, yes. That is the bottom of the TC5356's rated range, which covers walk-in freezers and unheated exterior runs in cold climates. Nylon does stiffen at low temperature, so seat the screw and the tie at room temperature where you can.
How fast can I get the Thomas & Betts TC5356 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts TC5356 come with a warranty?
Absolutely. The Thomas & Betts TC5356 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts TC5356?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts TC5356 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.