NGP 152VA 84 Dense Bulb Perime...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$53.52
NGP 152VA Dense Bulb Perimeter Seal, Vinyl, 84", Satin Aluminum Clear Anodized Finish

NGP 152VA 84 Dense Bulb Perimeter Seal with Vinyl Gasket 84" Satin Aluminum Clear Anodized

(No reviews yet) Write a Review

Model: 152VA 84
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$53.52
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

NGP Dense Bulb Perimeter Seal with Vinyl Gasket 84" Satin Aluminum Clear Anodized

Professional Door Weatherstripping Solution

The NGP Dense Bulb Perimeter Seal delivers reliable weatherproofing for commercial door applications with an 84" length aluminum extrusion and dense vinyl bulb gasket. Constructed from aluminum alloy 6063 with T5 temper and featuring a satin aluminum clear anodized finish, this perimeter seal provides effective moisture and air infiltration control. The thermoplastic polyvinyl chloride gasket is formulated with an environmentally friendly bio-based plasticizer for enhanced performance across a temperature range of 0 F to 140 F.

Professional Features & Benefits

  • 84" Length: Pre-cut 84" aluminum extrusion provides convenient sizing for standard commercial door applications without field cutting.
  • Aluminum Alloy Construction: 6063 aluminum alloy with T5 temper delivers structural integrity and corrosion resistance for long-term durability.
  • Dense Vinyl Bulb Design: Black vinyl gasket creates effective seal against air and moisture infiltration while maintaining flexibility across temperature extremes.
  • Temperature Performance: Operates reliably from 0 F to 140 F for versatile climate applications and seasonal temperature variations.
  • Environmentally Friendly Formulation: Polyvinyl chloride gasket incorporates bio-based plasticizer for reduced environmental impact without compromising performance.
  • Adjustable Installation: Slotted screw holes allow for precise positioning and alignment during installation for optimal seal contact.
  • Complete Hardware Package: Includes #6 x 3/4" stainless steel sheet metal screws for secure mounting to door frames.
  • Flame and Moisture Resistant: Gasket material provides flame resistance and moisture protection for enhanced safety and durability.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Astragals, Gaskets and Weatherstripping
  • Product Type: Gasketing
  • Subcategory: Gaskets & Weatherstripping

Professional Applications

  • Commercial Office Building Entrances
  • Educational Facility Exterior Doors
  • Healthcare Institution Climate Control
  • Retail Store Weather Protection
  • Industrial Facility Environmental Sealing
  • Multi-Tenant Building Energy Efficiency
  • Government Building Weatherization

Why Choose NGP Quality?

NGP perimeter seals combine aluminum alloy 6063 construction with environmentally friendly vinyl gasket formulation for reliable commercial weatherproofing performance. The T5 temper aluminum provides structural durability while the bio-based plasticizer formulation delivers effective sealing across the 0 F to 140 F temperature range. Engineered for demanding commercial applications where consistent environmental protection and energy efficiency are essential.

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Astragals, Gaskets and Weatherstripping
Product Type:
Gasketing
Subcategory:
Gaskets & Weatherstripping
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

NGP 152VA 84 – Frequently Asked Questions

1) Will an 84 inch NGP 152VA perimeter seal cover the head and both jambs of a standard door opening?
No, not on its own. The 152VA ships as a single 84 inch aluminum extrusion, so one piece covers one leg of the frame. A standard commercial opening needs three pieces, two jamb legs plus the head, so plan on ordering multiples and cutting the head piece down from an 84 inch stick. The extrusion is 6063-T5 aluminum and cuts cleanly with a miter saw and a non-ferrous blade.
2) Can I adjust the seal after it is mounted if the bulb is not touching the door?
Yes. The 152VA extrusion has slotted screw holes rather than round ones, so you can back the screws off and shift the housing in or out to set bulb compression against the door face, then retighten. That is the difference between a seal that shuts the gap and one that drags on the door and gets torn off in a month. Set it with the door closed and check contact along the full leg before you snug everything down.
3) Will an NGP dense bulb vinyl perimeter seal hold up in a cold climate or on a hot south-facing entrance?
The vinyl bulb on the 152VA is rated from 0 F to 140 F. That covers most of the continental US in normal service, including a black extrusion baking on a west or south exposure. Below zero, sustained, is outside the stated range, so for a freezer vestibule, a cold storage door, or a far-northern unheated opening you want a silicone bulb seal instead, which stays flexible well past the point vinyl goes stiff.
4) Will the NGP 152VA seal the bottom of the door too, or do I need a separate part?
Perimeter seal only. The 152VA handles the head and the two jambs, where the door face meets the frame stop. The gap under the door is a separate job and takes a door bottom or sweep, and if the threshold gap is the source of the draft or the light leak, gasketing the perimeter alone will not fix it. On a full weatherization of an exterior opening, budget for perimeter gasketing plus a door bottom plus a threshold.
5) Does the NGP 152VA perimeter seal come with mounting screws, or do I need to supply my own?
Screws are in the box. Each 152VA seal includes #6 x 3/4 inch stainless steel sheet metal screws for fastening the extrusion to the frame. The stainless fastener matters on exterior openings, which is where a perimeter seal usually lands, since a plated steel screw in a wet jamb rusts and streaks the aluminum.
6) Is the NGP 152VA a commercial-duty perimeter seal or a residential weatherstrip?
Commercial. The 152VA is built as commercial door gasketing, with an extruded 6063-T5 aluminum housing rather than the folded thin-gauge or foam-tape products sold for houses. It is meant for hollow metal and aluminum frames on office entrances, school exteriors, healthcare, and multi-tenant buildings, where the seal gets slammed on daily and has to keep sealing.
7) What is the difference between a dense bulb perimeter seal and a vinyl-insert channel gasket like the Cal-Royal PG-601?
Both are aluminum-channel perimeter gasketing that mounts to the frame stop, and both use a vinyl sealing element. The 152VA uses a dense bulb profile, meaning the vinyl is a hollow tube that compresses against the door face and takes up an uneven gap along the leg. The Cal-Royal PG-601 is an aluminum channel with a vinyl insert. Where the door is warped, the frame is out of square, or the reveal varies top to bottom, a bulb has more give to work with. Where the gap is consistent and tight, either profile seals it.
8) What finish does the NGP 152VA come in, and will it match aluminum storefront?
One finish: satin aluminum clear anodized. That is the standard mill-look anodized finish, and it reads the same as clear-anodized aluminum storefront framing and most aluminum door stiles, so it disappears on a glass front entrance. The bulb itself is black vinyl, which shows as a thin dark line at the stop. On dark bronze or painted frames the clear anodized housing will contrast.
9) Can I replace just the vinyl on an NGP 152VA, or do I have to pull the whole extrusion?
The 152VA is supplied as a complete assembly, aluminum housing with the vinyl bulb gasket. When you are standardizing a building, the practical approach is to order the full seal for the openings that need it rather than trying to source loose bulb stock. The aluminum housing itself is 6063-T5 and outlasts the vinyl, so a facility keeping spares usually stocks complete units and swaps the whole leg.
10) Is the vinyl on the NGP 152VA flame resistant?
The polyvinyl chloride gasket on the 152VA is flame resistant and moisture resistant. It is also formulated with a bio-based plasticizer, which matters if you are chasing environmental criteria on an institutional or LEED-tracked project. Note that flame resistance of the gasket material is not the same thing as a labeled fire door assembly, so for a fire rated opening confirm the gasketing called out on your door schedule.
How fast can I get the NGP 152VA 84 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NGP 152VA 84 come with a warranty?
Absolutely. The NGP 152VA 84 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NGP 152VA 84?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the NGP 152VA 84 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!