NGP 201NA Neoprene Door Sweep ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.25
$26.25
NGP 201NA Neoprene Door Sweep with Anodized Aluminum Housing and Stainless Steel Mounting Hardware

NGP 201NA Neoprene Door Sweep with Anodized Aluminum Housing and Stainless Steel Mounting Hardware

(No reviews yet) Write a Review

Model: 201NA-36

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.25
$26.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

NGP Neoprene Door Sweep with Anodized Aluminum Housing and Stainless Steel Mounting Hardware

Professional Door Bottom Sealing Solution

The NGP Neoprene Door Sweep combines durable anodized aluminum construction with high-performance synthetic rubber polymer blend for reliable door bottom sealing. Featuring aluminum alloy 6063 T5 temper housing and chloroprene/EPDM neoprene blend, this door sweep operates effectively in temperature ranges from -20 F to 200 F. BHMA certified to ANSI/BHMA A156.22 performance standards for heat and cold resistance, ensuring professional-grade reliability for commercial applications.

Professional Features & Benefits

  • Temperature Performance: Operates reliably from -20 F to 200 F for year-round effectiveness in varying climate conditions.
  • Heavy-Duty Construction: Aluminum alloy 6063 T5 temper housing provides exceptional durability and corrosion resistance for long-term performance.
  • Advanced Rubber Blend: Synthetic rubber polymer blend of chloroprene and EPDM delivers superior abrasion resistance, tensile strength, and memory retention.
  • Weather Resistance: Flame resistant and moisture resistant construction with excellent resistance to ozone, sunlight, and aging for outdoor applications.
  • BHMA Certification: Certified to ANSI/BHMA A156.22 performance tests for heat and cold compliance with industry standards.
  • Adjustable Installation: Slotted screw holes allow for precise positioning and alignment during installation.
  • Complete Hardware Package: Includes #6 x 3/4" stainless steel sheet metal screws for secure mounting and corrosion resistance.
  • Professional Finish: Anodized aluminum housing with black neoprene seal provides clean appearance suitable for commercial environments.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Bottom Sweeps and Door Shoes
  • Product Type: Door Sweeps and Bottoms
  • Series: Neoprene Door Sweep Series
  • Subcategory: Gaskets & Weatherstripping

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose NGP Quality?

NGP door sweep products deliver professional-grade reliability with aluminum alloy 6063 T5 temper construction and synthetic rubber polymer blend rated for -20 F to 200 F temperature performance. BHMA certified to ANSI/BHMA A156.22 performance standards for heat and cold resistance with superior abrasion resistance and memory retention. Engineered for demanding commercial applications where dependable weathersealing performance is essential.

Product Specs

Product Group:
Door Trim and Accessories
Series:
Neoprene Door Sweep Series
Product Subgroup:
Door Bottom Sweeps and Door Shoes
Product Type:
Door Sweeps and Bottoms
Subcategory:
Gaskets & Weatherstripping
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

NGP 201NA-36 – Frequently Asked Questions

1) What lengths does the NGP 201NA neoprene door sweep come in?
The 201NA is stocked in 36 inch and 42 inch lengths. The 36 inch covers a standard 3-0 commercial door leaf; the 42 inch is for wider openings, or for cutting down to an in-between width. Aluminum housing this shape is routinely cut to length on site with a hacksaw or chop saw, so order the next size up rather than the next size down if your leaf falls between the two.
2) Will an NGP 201NA door sweep hold up on an exterior door through winter and summer?
Yes. The neoprene seal on the 201NA is a chloroprene and EPDM synthetic rubber blend rated from -20 F to 200 F, and it resists ozone, sunlight, and aging. The housing is 6063 T5 aluminum alloy, anodized, so it will not rust on a weather-exposed opening. It carries BHMA certification to ANSI/BHMA A156.22 for heat and cold performance, which is the test a spec writer looks for on an exterior application.
3) Does the NGP 201NA door sweep come with mounting screws, or do I need to buy them?
Screws are in the box. The 201NA ships with #6 x 3/4 inch stainless steel sheet metal screws, so nothing else needs ordering to hang it on a standard door face. Stainless matters on an exterior opening where plated steel screws would bleed rust down the door. The screw holes in the housing are slotted, so you can set the seal height against the threshold before you drive them home.
4) Is a neoprene sweep or a brush sweep better for my door?
Neoprene, like the NGP 201NA, is a solid rubber seal that presses flat against the threshold. It blocks air, water, light, and insects far better than bristle, which makes it the choice on exterior doors and anywhere you are fighting drafts or driven rain. A brush sweep such as the Pemko 29326NB or the Cal-Royal BTN-112 sweeps over rough or uneven floors, carpet transitions, and out-swinging doors that would drag and tear a rubber seal. Rule of thumb: seal it with neoprene, sweep it with brush.
5) What is the closest equivalent to the NGP 201NA door sweep from another manufacturer?
The Cal-Royal BTN-112 is built the same way: an extruded aluminum retainer carrying a neoprene insert, the same housing-plus-neoprene combination as the NGP 201NA with its anodized aluminum housing and chloroprene/EPDM neoprene seal. Both wipe the door bottom with a solid rubber seal rather than a brush, so they behave alike against a flat, level threshold. The NGP 201NA is offered in 36 inch and 42 inch lengths, so match your door width when cross-referencing.
6) The floor under my door is uneven and a rubber sweep drags. What should I use instead of a neoprene sweep?
Use a brush sweep. The Pemko 29326NB is a brush door bottom sweep in clear anodized aluminum in a 36 inch length, and the Cal-Royal BTN-112 comes out of a brush weatherstrip series. Brush filaments ride over threshold irregularities and floor covering transitions, where the solid neoprene seal on the NGP 201NA needs a consistent gap to seal against. On a level opening the neoprene gives you a continuous contact seal instead of a filament curtain.
7) How do I set the height of a door sweep so it seals without dragging?
The 201NA has slotted screw holes rather than round ones, which is what lets you fine tune it. Close the door, hold the sweep against the face with the neoprene just kissing the threshold, start the #6 stainless screws through the slots, then slide the housing up or down until the seal makes light continuous contact along the full width before tightening. Too low and the door drags and the rubber wears through at the pivot side; too high and you can see daylight at the ends.
8) Does the NGP 201NA meet ANSI/BHMA A156.22 for a spec job?
It does. The 201NA is BHMA certified to ANSI/BHMA A156.22, specifically the heat and cold performance tests, which is the gasketing and weatherstripping standard institutional and government specs cite. Paired with the -20 F to 200 F rating on the neoprene, that is the documentation a facilities or MRO buyer needs when standardizing sweeps across a building.
9) What is the difference between a door sweep and a door bottom or rain drip?
A sweep like the NGP 201NA mounts to the face of the door and its seal rides on top of the threshold, sealing the gap underneath. It is surface applied, so it goes on an existing door with no machining. A rain drip such as the Pemko 3452 is a different part with a different job: it sheds water away from the head or bottom of an exterior opening rather than sealing the gap. On a leaking exterior door you often want both, the sweep to close the gap and a drip to keep water off it.
10) Is the NGP 201NA sweep rated for commercial traffic or is it a residential part?
Commercial. NGP classes the 201NA as a commercial product, and the neoprene blend is specified for abrasion resistance, tensile strength, and memory retention, memory being what keeps the seal from taking a permanent set after thousands of closings. It is used on office buildings, schools, healthcare facilities, retail, warehouses, multi-tenant residential, and municipal buildings. On a high-cycle entrance that is the difference between a seal that still touches the threshold in year three and one that has flattened out.
11) Can I mount an NGP 201NA sweep on a hollow metal or wood door?
Both. The 201NA fastens through the door face with the supplied #6 x 3/4 inch stainless sheet metal screws, which thread into hollow metal skin or bite into a wood door or a wood-edged flush door without any prep beyond pilot holes. There is no mortising and no cutting into the door bottom. On an aluminum storefront stile you can drill and drive the same screws, just pilot for the aluminum.
12) We have a LEED project that needs low-emitting materials. What door sweep should we specify?
The Pemko 345V uses a GREENGUARD Gold certified Eco-V insert, and the Pemko 56 series carries the same Eco-V insert in a 36 inch length. The NGP 201NA uses a chloroprene and EPDM neoprene blend certified to ANSI/BHMA A156.22 performance tests for heat and cold, rated from -20 F to 200 F, so specify the 201NA where the driver is temperature performance and the Eco-V products where the driver is the material certification.
13) I need a door sweep with no visible screw heads on the face. Does the NGP 201NA do that?
The NGP 201NA mounts through slotted screw holes with the supplied #6 x 3/4 inch stainless steel sheet metal screws, so the fasteners are on the face of the housing and the slots let you adjust seal height at install. If the finished appearance calls for hidden fasteners, the Pemko 29326NB is a concealed fastener design in clear anodized aluminum. Both give an anodized aluminum housing on the door face.
14) My door is 42 inches wide. Which door bottom sweeps cover that width?
The NGP 201NA is offered in a 42 inch length as well as 36 inch, so it covers a 42 inch leaf without splicing. The Pemko 29326NB brush sweep and the Pemko 56 series with Eco-V insert are both 36 inch, which suits a standard 36 inch door. For wide leaves in commercial openings, size the sweep to the door width first and then choose between the neoprene seal and a brush.
15) Will an anodized aluminum door sweep match my existing door hardware finish?
The 201NA housing is clear anodized aluminum with a black neoprene seal, so it reads as a plain silver aluminum edge against the door. That matches most aluminum storefront, mill finish thresholds, and satin chrome or aluminum-finish hardware. On a fleet of openings where you already have clear anodized bottom seals, the Pemko 29326NB is also clear anodized aluminum if you need brush on some of the doors and want the housings to match.
How fast can I get the NGP 201NA-36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NGP 201NA-36 come with a warranty?
Absolutely. The NGP 201NA-36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NGP 201NA-36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the NGP 201NA-36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!