You may also like
NON-INS BTT SPLICE No9-7 1.03 LEN
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Butt Splice
- Standards:
- UL E9809
- Temperature Range:
- 150 °C
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon DD102 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon DD102 butt splice take?
The DD102 is sized for No. 9 through No. 7 AWG conductors. Both ends of the barrel take the same range, so it joins a 9, 8, or 7 gauge wire to another in that range. It will not grip anything smaller reliably, so for 10 AWG and below move to a smaller barrel.
2) Is the Sta-Kon DD102 splice insulated, and do I need to cover it after crimping?
It is a non-insulated butt splice, a bare copper barrel with no sleeve. After crimping you need to insulate it yourself with heat shrink or tape to keep the joint off ground and surrounding conductors. If you would rather not do that step, choose an insulated butt splice in the same wire range instead.
3) What voltage and temperature is the DD102 splice rated for?
600 volts, with a temperature rating of 150 degrees C. That covers standard building branch circuits and gets you into high-heat locations like luminaire wiring compartments and motor terminal boxes where a 105 C splice would not qualify.
4) Is the Sta-Kon DD102 butt splice UL listed?
Yes. It carries UL file E9809. For inspected commercial and institutional work that is the reference an electrical inspector or spec writer will want on the submittal.
5) Can the DD102 splice be used on aluminum conductors?
No. The barrel is copper, so it is intended for copper conductors only. Aluminum needs a connector specifically listed AL or AL9CU with the proper compound.
6) How long is the Sta-Kon DD102 barrel?
The DD102 measures 1.03 in length. That matters when you are splicing inside a shallow box or a tight raceway, since you need room for the barrel plus whatever insulation you apply over it.
7) What is the exact part number and brand for this 9-7 AWG non-insulated butt splice?
Sta-Kon DD102. That is the manufacturer part number for ordering, and the piece is a plain metallic finish copper barrel. Country of origin is Mexico.
How fast can I get the Sta-Kon DD102 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon DD102 come with a warranty?
Absolutely. The Sta-Kon DD102 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon DD102?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon DD102 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.