You may also like
NON-INS FEM-250 FLAG DISC, 16-14 LE
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Product Subgroup:
- Disconnects
- Product Type:
- Non-Insulated 90 Degree Flag Female Disconnect
- Standards:
- UL E66716
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Brass
Sta-Kon B14-250A – Frequently Asked Questions
1) What wire size does the Sta-Kon B14-250A flag disconnect crimp onto?
The B14-250A takes 16-14 AWG stranded wire, which is the standard range for appliance, motor and control wiring. One crimp barrel size only, so 12 AWG and larger will not seat in it.
2) What size tab does this female disconnect fit?
It is a .250 series female disconnect, so it slides onto a 1/4 inch wide male blade or tab, the most common size on switches, relays, and motor terminals.
3) Is the Sta-Kon B14-250A insulated?
No. It is a bare brass terminal with no insulation sleeve, so you need to sleeve or boot it yourself if the connection could be touched or could short against adjacent metal. For a ready-insulated connection, use a nylon or vinyl insulated .250 female disconnect instead.
4) Why choose a 90 degree flag disconnect instead of a straight one?
A flag terminal brings the wire in at a right angle to the tab instead of straight back. That matters when you are terminating in a shallow enclosure, a crowded motor junction box, or behind a switch where a straight disconnect would force a tight bend in the conductor. If you have room behind the tab, a straight female .250 disconnect is the simpler choice.
5) Is this Sta-Kon disconnect UL recognized?
It carries UL file E66716. For institutional and MRO work where terminations have to be a listed component, that file number is what inspectors and spec writers look for.
6) Do I need a special crimp tool for Sta-Kon non-insulated terminals?
Yes, a non-insulated crimp die, not the insulated-terminal nest. Non-insulated barrels like the B14-250A are crimped with the oval or W-style die sized for 16-14 AWG. Using an insulated-terminal crimper on a bare barrel gives an under-formed crimp that pulls out.
7) What material is the B14-250A terminal made of, and where is it made?
Brass body, metallic finish, no plating color to match. Made in the United States.
8) How do I order the right part number for this flag disconnect?
Order it as Sta-Kon B14-250A. That single part number covers the non-insulated 90 degree flag female .250 disconnect for 16-14 AWG, there are no finish or size options to pick.
How fast can I get the Sta-Kon B14-250A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B14-250A come with a warranty?
Absolutely. The Sta-Kon B14-250A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B14-250A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B14-250A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.