You may also like
NON-INS RECT RING TRM 12-10 No8
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Rectangular Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C482 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon C482 ring terminal crimp onto?
The C482 is sized for 12-10 AWG conductors. Run a smaller gauge like 16 or 14 AWG into it and the barrel will not grip properly, so step down to a terminal rated for that range instead.
2) What stud or screw size does the C482 ring fit?
The ring is drilled for a No. 8 stud or screw. That is the terminal block, ground screw, or bus stud it lands on, so confirm the stud on your equipment is a #8 before ordering.
3) Is the Sta-Kon C482 insulated, and does that matter for my application?
It is a non-insulated terminal, bare copper with no sleeve. In a panel or junction box where conductors sit close together you will want to sleeve the crimp with heat shrink or tape, or choose an insulated ring instead. Non-insulated is the usual pick where a high-pressure crimp and a lower profile matter more than built-in covering.
4) What is the voltage rating on the Sta-Kon C482 terminal?
Rated 600 V, which covers standard commercial branch circuits, control panels, and motor terminations up to 600 volt class.
5) Why a rectangular ring tongue instead of a round ring or a fork terminal?
The C482 uses a rectangular tongue, which gives more contact area under the screw head than a spade and still cannot pull off the stud the way a fork can. Use a fork or spade only where you need to slide the connection off without fully backing out the screw; for permanent power and ground terminations a ring tongue is the safer choice.
6) Is the Sta-Kon C482 copper or aluminum, and can I use it on aluminum conductors?
The body is copper, so it is intended for copper conductors. For aluminum or dual-rated AL9CU work you need a terminal specifically marked for aluminum, not this one.
7) Where is the Sta-Kon C482 terminal made? I have domestic sourcing requirements.
Country of origin is the United States, which is what Buy American and similar domestic preference requirements on government and institutional work ask you to document.
How fast can I get the Sta-Kon C482 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C482 come with a warranty?
Absolutely. The Sta-Kon C482 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C482?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C482 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.