You may also like
NON-INS RING 10-12AWG NO6STUD 45DEG
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal - 45 Degree Bend
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon C33UF – Frequently Asked Questions
1) What wire sizes does the Sta-Kon C33UF ring terminal accept?
The C33UF takes 12-10 AWG copper conductors. If you are terminating 14-16 AWG or anything heavier than 10 AWG, you need a different barrel size, since crimping outside the stated range gives you a mechanically unsound joint.
2) What stud size does the Sta-Kon C33UF ring fit?
It is built for a No. 6 stud or screw. The ring tongue will pass over a #6 terminal post; on a larger #8 or #10 stud it will not seat, so match the ring to the lug or breaker terminal you are landing on.
3) Why would I pick a 45 degree bend ring terminal instead of a straight one?
The 45 degree offset on the C33UF angles the wire away from the stud, which is what you want in a tight panel or junction box where a flag or straight ring would force a sharp bend in the conductor right at the crimp. A straight ring is fine where there is room to run the wire in line with the stud; the angled version buys you clearance and keeps strain off the barrel.
4) Is the Sta-Kon C33UF insulated?
No. It is a bare, non-insulated copper ring terminal. You supply your own insulation at the joint, normally heat shrink or tape, which also means you can use it where an insulated sleeve would not fit under a terminal cover or in a crowded barrier strip.
5) Can I use the C33UF terminal on aluminum wire?
The C33UF is a copper terminal, so it is intended for copper conductors in the 12-10 AWG range. Aluminum branch wiring needs a connector rated and marked for aluminum, typically an AL9CU or AL/CU dual-rated lug.
6) Do I need a special crimp tool for non-insulated Sta-Kon ring terminals?
Yes, a bare terminal like the C33UF is crimped with a non-insulated die, not the color-coded insulated nest. Non-insulated barrels are indented or hex crimped; using an insulated-terminal die on a bare barrel under-forms the joint. Match the die to the 12-10 AWG barrel size.
7) Is the Sta-Kon C33UF made in the USA?
Country of origin on the C33UF ring terminal is the United States. That matters on federally funded or Buy American jobs where the electrical bill of material has to be documented down to the terminations.
8) I need to standardize terminations across a facility - how do I order the right Sta-Kon ring?
Spec the three things that define the part: conductor range, stud size, and tongue geometry. The C33UF covers 12-10 AWG on a No. 6 stud with a 45 degree bend, non-insulated copper. Order by the MPN C33UF so you get the same geometry every time rather than a straight or flag tongue that will not clear the same way.
How fast can I get the Sta-Kon C33UF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C33UF come with a warranty?
Absolutely. The Sta-Kon C33UF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C33UF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C33UF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.