Sta-Kon L972NP NON INS RING 3/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.81
$31.17
Image coming soon

Sta-Kon L972NP NON INS RING 3/0AN-3/0 5/16 NP

(No reviews yet) Write a Review

Model: L972NP

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.81
$31.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
NON INS RING 3/0AN-3/0 5/16 NP

Manufacturer Resources

Product Specs

Country Of Origin:
Mexico (MX)
Number Of Terminals Nterm :
1
Product Subgroup:
General Terminals
Product Type:
Non-Insulated Ring Terminal
Wire Size:
3/0AN - 4/0
Department:
Electrical
Product Group:
Wire Termination
Product Material:
Copper

Sta-Kon L972NP – Frequently Asked Questions

1) What wire size does the Sta-Kon L972NP ring terminal take?
The L972NP is sized for 3/0AN through 4/0 conductor. If your cable is smaller than 3/0, the barrel will not crimp down tight enough to hold and you need a smaller lug.
2) Is the L972NP lug insulated, and do I need to cover it after crimping?
It is a non-insulated copper lug, bare barrel and bare tongue. Anywhere the termination needs dielectric protection, you add heat shrink or a lug boot over the barrel yourself after crimping, or rely on the enclosure.
3) Can I use the Sta-Kon L972NP on aluminum conductor?
The L972NP is a copper lug. Copper-only lugs are intended for copper conductor; aluminum or copper-clad aluminum feeders need a lug rated AL/CU for that conductor material.
4) Is the Sta-Kon L972NP a crimp lug or a mechanical set-screw lug?
It is a compression lug, crimped with a die-type tool sized for 3/0 to 4/0 copper. If you want a termination you can install with just a hex key and re-use, a set-screw mechanical lug is the better choice for that panel.
5) How many conductors does one L972NP lug terminate?
One. It is a single-barrel, one-hole ring lug, so a 3/0 to 4/0 run needs one lug per conductor end. Count your terminations, not your cable runs, when you order.
6) What is the manufacturer part number and country of origin for this Sta-Kon ring lug?
Order it as Sta-Kon L972NP. It is manufactured in Mexico.
How fast can I get the Sta-Kon L972NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon L972NP come with a warranty?
Absolutely. The Sta-Kon L972NP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon L972NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon L972NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.