You may also like
NON-INS RING TERM 18-14 No4 METAL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B132 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon B132 ring terminal accept?
The B132 ring terminal takes 18 to 14 AWG conductor. That covers the usual control, fixture, and low-current branch wiring a maintenance electrician runs into. Anything heavier than 14 AWG needs a larger barrel terminal.
2) Will the Sta-Kon B132 ring terminal fit a #4 screw stud?
Yes, the B132 is built around a No. 4 stud ring, so it lands on a #4 screw or stud. If the terminal block or ground lug uses a #6 or #8 screw, the tongue hole is too small and you need a larger ring size.
3) Is a non-insulated ring terminal like the B132 okay to use, or do I need an insulated one?
A non-insulated terminal is bare copper with no sleeve, so the crimp barrel stays exposed. That is fine inside a grounded enclosure, on grounding screws, or where you follow up with heat shrink or tape. If the connection sits where conductors could touch or where you want strain relief at the barrel, choose an insulated ring terminal in the same 18-14 AWG range instead.
4) Is the B132 ring terminal copper, and can I use it on an aluminum conductor?
The barrel is copper, so it is intended for copper conductors. Aluminum wire needs a terminal specifically rated AL or AL/CU; putting bare copper on aluminum invites galvanic corrosion at the crimp.
5) Are these ring terminals made in the USA for a government or Buy American job?
Country of origin on the Sta-Kon B132 is the United States, which is what procurement needs for domestic-preference documentation on federal, education, and municipal work.
6) Do I need a special crimp tool for the Sta-Kon B132?
It is a crimp-on barrel, not a screw or solder lug, so you terminate it with a crimping tool sized for 18-14 AWG non-insulated terminals. A non-insulated crimp die is a different profile than the colored insulated-terminal nests, so make sure your tool has the bare-barrel station.
How fast can I get the Sta-Kon B132 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B132 come with a warranty?
Absolutely. The Sta-Kon B132 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B132?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B132 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.