You may also like
NON-INS RING TRM 22-16 BOLT No10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 22-16 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon A87 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon A87 ring terminal crimp onto?
The A87 ring terminal accepts 22 to 16 AWG stranded copper wire. Anything heavier than 16 AWG will not seat in the barrel, and anything lighter than 22 AWG will pull out even after a proper crimp, so step to a different barrel size for those runs.
2) What stud or bolt size does the Sta-Kon A87 ring fit?
The ring is sized for a No. 10 stud or bolt. It will drop over a #10 screw on a terminal block, ground lug, or motor stud. On a 1/4 inch stud the ring will not pass, and on a #8 screw the ring is loose enough that you want a washer under the nut.
3) Is the Sta-Kon A87 UL listed for panel and control work?
The A87 is covered under UL file E9809. That is the reference an inspector or a panel shop QA reviewer will want when the termination has to be on a listed component.
4) Is a non-insulated ring terminal the right choice, or should I use an insulated one?
The A87 is a bare copper ring with no insulating sleeve, so the barrel is exposed after crimping. That is what you want when you are heat-shrinking over the joint yourself, when the terminal sits inside an enclosure with clearance, or when a spec calls for an inspectable crimp. In a tight bundle where adjacent studs or a metal case could be touched, pick an insulated ring in the same 22-16 AWG range instead.
5) Is the A87 ring terminal copper or aluminum, and can I put it on aluminum conductors?
It is a copper terminal. Use it on copper conductors only. Aluminum wire requires a terminal rated AL or AL/CU, and putting bare copper on aluminum invites galvanic corrosion at the crimp.
6) What is the exact part number to order for a non-insulated #10 ring terminal in 22-16 AWG?
Order Sta-Kon A87. One manufacturer part number covers it, with no finish or packaging variants to pick, so the only things you confirm are the 22-16 AWG wire range and the No. 10 stud.
7) Is the Sta-Kon A87 made in the USA for a government or buy-American job?
Country of origin on the A87 is the United States. For federal, state, or institutional work with domestic sourcing language in the contract, that is the documentation point you need on the submittal.
How fast can I get the Sta-Kon A87 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon A87 come with a warranty?
Absolutely. The Sta-Kon A87 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon A87?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon A87 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.