You may also like
NON INS TUB RING 1/0AN-2/0 NKL PL
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 1/0AN-2/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon J972NP – Frequently Asked Questions
1) What wire size does the Sta-Kon J972NP ring terminal take?
The J972NP is sized for 1/0 AN through 2/0 conductor. It is a tubular barrel lug, so the stripped conductor seats fully into the barrel before crimping. Running it on anything smaller than 1/0 leaves the strands loose in the barrel and gives you a connection that will heat up, so step down to a terminal sized for that gauge instead.
2) Is the J972NP lug copper, and is it plated?
Copper barrel with nickel plating. The copper body keeps conductivity high for the heavy 1/0 to 2/0 conductor it is built for, and nickel plate is the finish you want where the termination sees heat or a corrosive environment rather than the more common tin plating.
3) Does this Sta-Kon ring terminal come with insulation or a heat shrink sleeve?
No. The J972NP is a non-insulated lug, bare barrel and bare tongue. If the installation needs the barrel covered, you add heat shrink or a separate insulating boot yourself. On exposed battery and panel terminations that is usually how it is done anyway, since you want to inspect the crimp.
4) What is the right way to attach a 2/0 tubular ring lug like the J972NP?
It is a crimp lug, not a set screw or solder lug. The conductor goes into the tubular barrel and gets crimped with a heavy-duty hydraulic or mechanical crimper and the die matching 1/0 to 2/0 copper. Pliers or a hand tool rated for small gauge terminals will not develop a sound crimp on a barrel this size.
5) Where is the Sta-Kon J972NP made, and what part number do I order by?
Order it as Sta-Kon J972NP, which is the manufacturer part number. Country of origin is Mexico. Distributors cross-referencing the line should note the J972NP is the nickel-plated version of the non-insulated tubular ring lug for 1/0 to 2/0, so confirm the NP suffix if the job calls out nickel rather than plain or tin plate.
How fast can I get the Sta-Kon J972NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon J972NP come with a warranty?
Absolutely. The Sta-Kon J972NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon J972NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon J972NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.