You may also like
NONINS FEM 187 DISC No22-18 LEN .64
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Product Subgroup:
- Disconnects
- Product Type:
- Non-Insulated Female Disconnect
- Standards:
- UL E66716
- Voltage Rating:
- 600 V
- Wire Size:
- 22-18 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Brass
Sta-Kon AD182 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon AD182 female disconnect crimp onto?
The AD182 is sized for 22 to 18 AWG stranded or solid conductor. That is the small control-wire range, so it suits thermostat leads, appliance controls, and low-current signal runs. Anything 16 AWG or larger will not seat in the barrel, and crimping an oversized conductor into it gives you a connection that will pull out.
2) Is the Sta-Kon AD182 insulated, and does it need a sleeve?
It is a bare brass terminal with no insulation on it at all. For anything that could be touched or that sits near other live metal, you will want to slide a separate insulating sleeve over the crimp or route it inside an enclosure. Non-insulated is often chosen deliberately in tight junction boxes and on terminal blocks where an insulated barrel will not clear.
3) What voltage can the AD182 disconnect be used at?
It carries a 600 V rating, which covers standard commercial control circuits, 120/277 V lighting controls, and 480 V equipment wiring. Keep in mind the terminal itself is uninsulated, so the 600 V rating applies to the terminal, and clearance and insulation in your assembly still have to meet the circuit's requirements.
4) Is the Sta-Kon AD182 UL listed for panel and control work?
Yes, it is covered under UL file E66716. That matters for MRO and institutional buyers who have to show listed components in a control panel or equipment build, and for inspectors looking at terminations in a listed assembly.
5) What is the correct part number to order for a Sta-Kon 187 non-insulated female disconnect in 22-18 AWG?
Order Sta-Kon AD182. That is the manufacturer part number for the brass, non-insulated 187 female quick-disconnect rated 22 to 18 AWG, and it is made in the United States.
6) Can I crimp the AD182 with ordinary pliers or do I need a proper crimp tool?
Use a crimp tool matched to a non-insulated terminal barrel in the 22-18 AWG range. Non-insulated terminals like the AD182 take a different die profile than the color-coded insulated types, and a plier squeeze leaves a joint that heats up and backs off a vibrating tab. The brass barrel will take a proper indent crimp cleanly.
How fast can I get the Sta-Kon AD182 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon AD182 come with a warranty?
Absolutely. The Sta-Kon AD182 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon AD182?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon AD182 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.