You may also like
NONINS FEM 250 DISC No16-14 LEN .87
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Product Subgroup:
- Disconnects
- Product Type:
- Non-Insulated Female Disconnect
- Standards:
- UL E66716
- Voltage Rating:
- 600 V
- Wire Size:
- 16-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Brass
Sta-Kon B250G – Frequently Asked Questions
1) What wire gauge does the Sta-Kon B250G female disconnect crimp onto?
The B250G takes 16-14 AWG stranded or solid conductor. Anything smaller than 16 AWG won't get a reliable crimp in this barrel, and 12 AWG will not seat. For a 22-18 AWG run you need the smaller barrel size in the same 250 series family, not this one.
2) Is the Sta-Kon B250G insulated, and does it need a sleeve?
It's a bare brass terminal with no insulation on it at all. In an enclosure where the connection could touch a grounded surface or an adjacent terminal, you add a separate nylon or vinyl insulating sleeve over the crimp, or you use a fully insulated disconnect instead. Non-insulated is the usual choice when a sleeve is applied separately or the terminal sits in a shrouded housing.
3) What voltage is the B250G disconnect rated for?
600 V. That covers 120/208, 240, 277 and 480 V control and power circuits, which is why it's common in panel and motor-control wiring. It carries UL file E66716.
4) Is the Sta-Kon B250G UL listed for commercial panel work?
It's covered under UL file E66716. That's the recognition an inspector or MRO spec is usually looking for on a wire termination in a control panel or equipment enclosure.
5) Do I need a special crimper for the Sta-Kon B250G?
It's a non-insulated barrel, so you crimp it with a non-insulated (open barrel or oval die) crimp tool, not the colored insulated-terminal dies. Using an insulated-terminal die on a bare brass barrel under-compresses the joint. Match the die to the 16-14 AWG range.
6) What is the part number for the Sta-Kon non-insulated .250 female disconnect for 16-14 wire?
Sta-Kon B250G is the manufacturer part number. It's the non-insulated female .250 quick-disconnect for 16-14 AWG, rated 600 V, with an overall length of .87.
7) Is the B250G brass or steel, and does that matter for the connection?
Brass, with a metallic finish and no plating color called out. Brass gives you a lower-resistance joint on copper conductor than a plain steel body, which is why it shows up on control and appliance terminations rather than throwaway repair-kit terminals.
8) Is the Sta-Kon B250G made in the USA?
Country of origin is the United States. That matters on government, healthcare and other procurement where domestic sourcing is part of the spec.
How fast can I get the Sta-Kon B250G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B250G come with a warranty?
Absolutely. The Sta-Kon B250G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B250G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B250G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.