You may also like
NONINS FLAG TERM, 22-14, No6, METAL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Wire Size:
- 22-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon AB14-6A – Frequently Asked Questions
1) What wire gauge range does the Sta-Kon AB14-6A flag terminal crimp?
The AB14-6A accepts 22 to 14 AWG stranded copper conductor. That one barrel covers the whole small-gauge control and fixture wiring range, so a single terminal works for 22 AWG signal leads up to 14 AWG branch wiring.
2) What stud or screw size does the AB14-6A flag terminal fit?
It is sized for a No. 6 stud or screw. If your terminal block or ground screw is a #8 or #10, this ring will not pass over it and you need the larger stud size in the same series.
3) Why use a flag terminal instead of a straight ring terminal?
On a flag terminal the barrel sits at a right angle to the tongue, so the wire runs parallel to the mounting surface instead of straight out from the stud. That is what you want in a shallow junction box, a crowded panel, or behind a fixture canopy where a straight ring terminal would force a tight bend on the conductor. The AB14-6A is the non-insulated version of that geometry for 22-14 AWG on a No. 6 stud.
4) Is the AB14-6A terminal insulated, and do I need to sleeve it?
Bare metal, no insulation. The barrel and tongue are exposed copper, so if the connection sits where it could contact another conductor or a grounded enclosure wall you should slide heat shrink or a nylon sleeve over the crimp yourself. Choose an insulated flag terminal instead if the application needs built-in protection.
5) Is the Sta-Kon AB14-6A UL recognized for use in a commercial panel?
It carries UL file E9809. For MRO and institutional work where the inspector wants a listed termination, that is the reference to cite on the submittal.
6) What material is the AB14-6A flag terminal made from, and will it work on aluminum wire?
The terminal body is copper. It is specified for copper conductor in the 22-14 AWG range; a copper-only barrel is not the right termination for aluminum wire, which needs a dual-rated AL/CU connector.
7) Is the Sta-Kon AB14-6A made in the USA for a government or Buy American job?
Country of origin is the United States, which is the line procurement officers on federal, education, and healthcare contracts ask about before they will accept a substitution.
8) What is the exact part number to order this Sta-Kon flag terminal under?
Order it as Sta-Kon AB14-6A. The A suffix identifies the non-insulated 22-14 AWG flag terminal with the No. 6 stud tongue, so distributors cross-referencing a bare number should confirm the stud size matches.
How fast can I get the Sta-Kon AB14-6A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon AB14-6A come with a warranty?
Absolutely. The Sta-Kon AB14-6A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon AB14-6A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon AB14-6A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.