You may also like
NONINS FLAG TERM, 22-14, No10, META
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Wire Size:
- 22-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon AB14-10A – Frequently Asked Questions
1) What wire sizes does the Sta-Kon AB14-10A flag terminal accept?
The AB14-10A takes 22 through 14 AWG conductors, so it covers the typical control, fixture and low-current branch wiring a contractor runs into on fit-out work. One barrel size spans that whole range, which means a single terminal and one die setting handles 22 AWG control wire and 14 AWG lighting runs on the same job.
2) What stud or screw size does the AB14-10A flag terminal fit?
It is a No. 10 stud terminal, so the tongue hole is sized for a #10 screw or stud. If your terminal block, breaker lug or ground screw is #8 or 1/4-20, this is the wrong size ring and it will either not seat or will spin under the head.
3) Is the AB14-10A insulated, and does that matter for my application?
No, it is a non-insulated terminal, bare copper with a metallic finish. You get no dielectric covering at the barrel, so if the connection sits where it could touch an adjacent terminal or a grounded enclosure wall, you need to sleeve it yourself with heat shrink or tape, or choose an insulated flag terminal instead. Bare barrels are the usual pick where an insulated body would not clear, or where the terminal lands inside an already-isolated block.
4) Is the Sta-Kon AB14-10A UL listed?
It carries UL file E9809. For institutional and MRO buyers who need listed terminations on inspected work, that is the reference to put on the submittal.
5) Can I use the AB14-10A on aluminum conductors?
No. The AB14-10A barrel is copper and is intended for copper conductors. Aluminum wire needs a terminal rated AL or AL9CU with the appropriate inhibitor compound; putting aluminum in a copper-only barrel invites galvanic corrosion and a loose joint over time.
6) Is the Sta-Kon AB14-10A made in the USA?
Country of origin is the United States, which is what government, education and healthcare procurement needs when a domestic-preference or Buy American clause is attached to the purchase order.
7) What part number should I order for a non-insulated #10 flag terminal from Sta-Kon?
AB14-10A is the manufacturer part number, a non-insulated copper flag terminal for 22-14 AWG wire with a No. 10 stud tongue. Distributors should order and cross-reference by that number directly.
How fast can I get the Sta-Kon AB14-10A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon AB14-10A come with a warranty?
Absolutely. The Sta-Kon AB14-10A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon AB14-10A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon AB14-10A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.