You may also like
NONINS FORK TERM, 18-14, No10, META
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B115 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon B115 fork terminal crimp?
The B115 is sized for 18 to 14 AWG stranded copper conductor. One barrel covers that whole range, so an 18 AWG control wire and a 14 AWG branch conductor both terminate in the same part number, which keeps the crimp die selection constant on a panel build.
2) What screw size does the B115 fork terminal fit?
It is a No. 10 stud terminal, so it slides onto a #10 screw or stud on a terminal block, contactor, or ground bar. Because it is a fork (spade) tongue rather than a ring, you can land it without pulling the screw all the way out, which is why it is the common choice for retrofit work in an existing panel.
3) Is the Sta-Kon B115 insulated, and do I need to sleeve it?
No, the B115 is a non-insulated fork terminal, bare metallic copper with no nylon or vinyl barrel. If your installation needs the barrel covered, you add heat shrink or a separate insulating sleeve yourself. Where terminals sit close together on a crowded block, an insulated fork terminal is the easier choice.
4) Is the B115 terminal UL listed and what voltage is it good for?
The B115 carries UL file E9809 and is rated 600 V. That covers typical 120/208, 277 and 480 V control and power terminations in commercial panels and equipment, and gives an institutional or MRO inspector a listing reference to record.
5) Fork terminal or ring terminal for a #10 stud, which should I order?
A fork tongue like the B115 drops on under a loosened #10 screw, so it is faster on service work and on blocks where the screw cannot be removed. A ring terminal cannot pull off if the screw backs out, so it is preferred for vibration-prone equipment and anywhere a captive connection is required by spec. Same wire range, different risk profile.
6) Is the Sta-Kon B115 made in the USA?
Yes, country of origin on the B115 is the United States. That matters on government, healthcare, and education jobs carrying domestic-content requirements, where the origin has to be documented on submittals.
7) What part number do I reference when reordering this non-insulated fork terminal?
Order by Sta-Kon B115. It is a single configuration, 18-14 AWG with a No. 10 fork tongue, so there are no finish, size, or insulation options to specify on the purchase order.
How fast can I get the Sta-Kon B115 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B115 come with a warranty?
Absolutely. The Sta-Kon B115 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B115?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B115 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.