You may also like
NONINS FLAG TERM, 9, 8, 7, No10, ME
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Wire Size:
- 8 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon D236 – Frequently Asked Questions
1) What wire size does the Sta-Kon D236 flag terminal take?
The D236 is built for 8 AWG wire. If you are terminating anything smaller, like 10 or 12 AWG, the barrel will not crimp down tight enough to hold and you need a terminal rated for that gauge instead.
2) What material is the Sta-Kon D236 terminal made of, and will it work with aluminum conductors?
The D236 is copper, finished bare metallic. It is a copper-only terminal, so use it on copper conductors. Aluminum wire needs a terminal specifically marked AL or AL9CU, and putting aluminum into a copper-only barrel sets up a dissimilar-metal joint that loosens and heats over time.
3) Is the Sta-Kon D236 insulated, and does that matter for where I use it?
It is a non-insulated flag terminal, so the barrel is bare copper with no nylon or vinyl sleeve. You get the crimp inspection you want on a panel build, but you have to provide the insulation yourself with heat shrink or sleeving if the terminal sits where it can contact an adjacent conductor or a grounded enclosure wall.
4) Why use a flag terminal instead of a standard straight ring terminal?
A flag terminal puts the tongue at a right angle to the wire barrel, so the conductor runs parallel to the mounting surface instead of straight into it. That is what you want on a crowded breaker panel, a motor terminal block, or a shallow junction box where there is not enough depth behind the stud to bring an 8 AWG wire in straight. If you have the room to come in axially, a straight ring or fork terminal is simpler.
5) Is the Sta-Kon D236 UL recognized?
Yes. The D236 carries UL file E9809. That is the reference an inspector or a spec writer will ask for on a panel or control enclosure build.
6) Do I need a special crimp tool for the Sta-Kon D236?
An 8 AWG non-insulated copper barrel is outside the range of the small hand crimpers used for insulated 22-10 AWG terminals. You need a heavy-duty non-insulated crimp tool or a hydraulic or ratcheting crimper with a die sized for 8 AWG non-insulated lugs. Pliers or a set screw will not give you a code-acceptable termination.
7) Is the Sta-Kon D236 made in the USA? I have a domestic sourcing requirement.
Country of origin on the D236 is the United States, which is the line item government, education, and healthcare procurement groups usually need documented for domestic preference requirements.
8) What is the exact part number to order for the Sta-Kon 8 AWG non-insulated flag terminal?
Order Sta-Kon D236. That is the manufacturer part number, and there is a single configuration, so there is no finish, stud size, or packaging option to specify separately.
How fast can I get the Sta-Kon D236 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon D236 come with a warranty?
Absolutely. The Sta-Kon D236 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon D236?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon D236 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.