You may also like
NONINS - TUB RING TERM, 6, No10, ME
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 6/6AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon E10261 – Frequently Asked Questions
1) What wire size does the Sta-Kon E10261 ring terminal take?
The E10261 is sized for 6 AWG conductor. It's a non-insulated copper tubular ring terminal, so the barrel is crimped bare with no insulation sleeve or heat shrink over it. If you're landing 4 AWG or 8 AWG, you need a different terminal in the series, not this one.
2) What voltage is the Sta-Kon E10261 ring terminal rated for?
600 V. That covers typical commercial branch circuits, panel and motor terminations, and control wiring. Because the barrel and tongue are bare copper with no insulation, the conductor insulation and whatever enclosure or boot you use have to provide the creepage and clearance at the termination.
3) Is the Sta-Kon E10261 UL listed?
It carries UL file E9809. That's the reference an inspector or a spec reviewer will want when the termination has to be a listed connector on a 600 V circuit.
4) Should I use a non-insulated ring terminal like this one or an insulated one?
Go non-insulated, like the E10261, when you're adding your own heat shrink, when the lug sits inside a boot or a tight terminal block where an insulation sleeve won't fit, or when a spec calls for a bare crimped copper termination you can inspect. Pick an insulated ring terminal instead if you want the strain relief and dielectric barrier built in and don't plan to shrink over the joint. Electrically the connection is the same; the difference is what covers it.
5) What is the Sta-Kon E10261 terminal made of, and can I use it on aluminum conductor?
Copper, with a metallic finish. It's a copper-bodied terminal, so use it on copper conductor. Aluminum or copper-clad aluminum needs a connector specifically marked AL or AL9CU with the appropriate oxide inhibitor.
6) Can I crimp the Sta-Kon E10261 with standard pliers?
No. This is a 6 AWG tubular-barrel ring terminal, and that size needs a proper crimper with the matching 6 AWG die, either a hand tool with nest and indenter or a hydraulic crimper. Hand pliers won't produce the compression the UL listing is based on, and a loose crimp on a 6 AWG feeder is a heat problem.
7) Where is the Sta-Kon E10261 made, and what part number do I order by?
Order by manufacturer part number E10261 from Sta-Kon. Country of origin is Mexico, which is the detail procurement groups usually need for trade compliance or domestic-preference paperwork.
How fast can I get the Sta-Kon E10261 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10261 come with a warranty?
Absolutely. The Sta-Kon E10261 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10261?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10261 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.