You may also like
NONINS - TUB RING TERM, 2, No10, ME
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Lugs & Terminals
- Product Type:
- Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 2 AWG
- Department:
- Electrical
- Product Group:
- Wire Connectors & Terminals
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon G926 – Frequently Asked Questions
1) What wire size does the Sta-Kon G926 ring terminal take?
The G926 is sized for 2 AWG conductor. It is a single-size barrel, so it won't crimp down reliably on 4 AWG or up on 1/0. Match the conductor exactly and use the die that corresponds to 2 AWG on your crimper.
2) Is the Sta-Kon G926 terminal UL listed for inspected work?
It carries UL file E9809, which is what an electrical inspector or a facility MRO spec will want to see on a terminal going into a listed assembly or panel. The terminal itself is marked as a non-insulated 2 AWG ring tongue rated 600 V.
3) Can I use this copper ring terminal on aluminum conductor?
No. The G926 is a copper barrel terminal and should be crimped on copper conductor only. Aluminum feeders need a lug rated AL/CU or aluminum-specific, otherwise you get galvanic corrosion and a hot connection at the crimp.
4) Is this terminal insulated, and do I need to sleeve it after crimping?
It's a non-insulated copper ring terminal, bare metal barrel and tongue. For anything in a panel or junction box where you need the barrel covered, plan on heat shrink or an insulating cap over the crimp. Nothing is supplied with it.
5) What voltage is the Sta-Kon G926 rated for?
600 V. That covers standard commercial and industrial branch circuits, feeders, motor leads, and control panel work up to 600 volts. It is not a medium-voltage terminal.
6) Is a ring terminal or a fork terminal better for a 2 AWG connection on a stud?
Use the ring style, which is what the G926 is. A closed ring cannot vibrate off the stud if the nut backs off, which matters on motor terminations, generator leads, and ground connections. Fork or spade tongues only make sense where you need to slide the lug out without fully removing the hardware, and at 2 AWG with a No. 10 stud you are usually on a permanent termination.
7) How do I order the Sta-Kon G926 and what is the part number?
Order it by manufacturer part number G926 from Sta-Kon. One configuration only, non-insulated, 2 AWG, No. 10 stud hole, so there is no finish or size option to specify. Country of origin is Mexico.
How fast can I get the Sta-Kon G926 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon G926 come with a warranty?
Absolutely. The Sta-Kon G926 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon G926?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon G926 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.