You may also like
NONINS RING No6AWG 1/4 BH NICKELPLT
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 6/6AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon E10711NP – Frequently Asked Questions
1) What wire size does the Sta-Kon E10711NP ring terminal take?
The E10711NP is sized for 6 AWG conductor. It's a one-size barrel, so it won't grip smaller 8 or 10 AWG wire reliably and won't accept 4 AWG at all. If your feeder is a different gauge, step to the matching Sta-Kon part rather than forcing this one.
2) Will this Sta-Kon ring terminal fit a 1/4 inch stud or bolt?
Yes, the ring tongue on the E10711NP is drilled for a 1/4 inch stud, so it lands on a 1/4-20 terminal screw, bus stud, or ground bolt. Because it's a closed ring rather than a spade, the lug stays captive if the nut loosens, which is why ring terminals are the usual choice on panel grounds and motor terminal boards.
3) Is the Sta-Kon E10711NP insulated, and do I need heat shrink or tape over it?
It's a non-insulated lug, bare metal barrel and tongue. On any live conductor you need to insulate the crimp yourself, typically adhesive-lined heat shrink over the barrel. The upside is you can inspect the crimp and the terminal handles higher temperatures than a nylon or vinyl insulated version.
4) What is the Sta-Kon E10711NP made of, and why is it nickel plated instead of tin?
The lug body is copper, plated with nickel rather than tin. Nickel plating is what you specify when the termination sees high heat or a corrosive atmosphere, such as heater elements, oven and furnace wiring, or exterior and marine-adjacent gear, where tin plating would degrade.
5) Can I crimp a 6 AWG Sta-Kon ring terminal with regular pliers or a hand tool?
No. A 6 AWG non-insulated barrel this size needs a proper crimping tool with the correct die for the gauge, usually a ratcheting or hydraulic crimper. Pliers or a cheap stamped tool leave a loose, high-resistance joint that heats up under load. The terminal ships bare with no tooling included.
6) Should I use a ring terminal or a fork terminal for a 6 AWG connection to a stud?
Use the ring, like the E10711NP, anywhere the connection is permanent or safety related: equipment grounds, battery and motor studs, bus bars. The nut has to come fully off to release it, so vibration can't walk the conductor out. A fork or spade slides out from under a loosened screw, and is only worth it when you need to service the terminal often and the screw is hard to reach.
7) What part number do I order and where is the Sta-Kon E10711NP made?
Order by manufacturer part number E10711NP, a Sta-Kon non-insulated 6 AWG ring terminal with a 1/4 inch stud hole and nickel plate. Country of origin is Mexico, which is the detail procurement asks for on trade compliance and domestic-preference paperwork.
How fast can I get the Sta-Kon E10711NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10711NP come with a warranty?
Absolutely. The Sta-Kon E10711NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10711NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10711NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.