You may also like
NONINS TRM No8AWG No8STUD NICKELPLT
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Voltage Rating:
- 600 V
- Wire Size:
- 8/8AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon D10361NP – Frequently Asked Questions
1) Will a No. 8 ring terminal fit over a 10-32 or 1/4-20 stud?
No. The ring on the D10361NP is sized for a No. 8 stud, so it will not pass over a 10-32 screw or a 1/4 inch stud. Ring tongues are fixed openings, and forcing or filing one is not an acceptable termination. Step up to a terminal with a #10 or 1/4 inch ring in the same 8 AWG barrel size for those studs.
2) Should I use a non-insulated ring terminal or an insulated one?
A non-insulated terminal like the D10361NP is the choice when you want to apply your own insulation (heat shrink for a sealed, strain-relieved joint) or when the lug sits inside an enclosure or panel where a bare barrel is acceptable and you want to see the crimp. Insulated versions with a nylon or vinyl sleeve are faster when you just need colour-coded, ready-to-go protection and no shrink tubing step. Note also that this is a ring, not a fork: the tongue is closed, so the nut has to come off the stud to install it, but it cannot vibrate loose off the screw.
3) Why is the Sta-Kon D10361NP nickel plated instead of tin plated?
The barrel and tongue are copper with nickel plating. Nickel plate is used where the termination sees high temperature or a corrosive atmosphere, which is why you see it on heater, oven, motor and industrial process wiring rather than general panel work. For ordinary indoor control and power terminations a tin plated copper terminal does the same job; specify nickel when the spec or the heat at the connection point calls for it.
4) Do I need a special crimp tool for this 8 AWG Sta-Kon terminal?
An 8 AWG non-insulated barrel needs a proper mechanical or ratcheting crimper with a non-insulated die in the 8 AWG nest. Plier-style insulated-terminal crimpers and the strip-and-squeeze jaws on a cheap combination tool will not form a sound crimp at this conductor size. The terminal ships bare, with no sleeve, so the die seats directly on the copper barrel.
5) Where is the Sta-Kon D10361NP terminal made?
Country of origin on the D10361NP is Mexico. That is the detail institutional and government buyers usually need for domestic-preference or procurement documentation, so it is worth recording on the submittal alongside the part number.
How fast can I get the Sta-Kon D10361NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon D10361NP come with a warranty?
Absolutely. The Sta-Kon D10361NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon D10361NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon D10361NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.