You may also like
NONINS TUB RNG TRM 1/0AN-2/0 BT7/16
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 1/0AN-2/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon J974 – Frequently Asked Questions
1) What wire size does the Sta-Kon J974 ring terminal take?
The J974 is sized for 1/0 AN through 2/0 conductor. It is a non-insulated tubular ring terminal, so the barrel is crimped bare with no sleeve to strip or heat shrink. If your cable is smaller than 1/0 or larger than 2/0, you need a different barrel size, since an undersized conductor in an oversized barrel will not hold a proper crimp.
2) Is the Sta-Kon J974 rated for 600 volt circuits?
Yes, the J974 carries a 600 V rating and is covered under UL file E9809. That puts it in range for standard commercial and industrial branch and feeder work at 600 V and below.
3) What material is the J974 lug, and can I use it on aluminum conductor?
The J974 barrel is copper, which means it is intended for copper conductor. For aluminum or dual-rated runs you want a lug specifically marked AL9CU; a plain copper terminal on aluminum cable risks a dissimilar-metal connection.
4) Does the J974 terminal need insulating after it is crimped?
It does. The J974 is a non-insulated tubular terminal, bare metallic copper with no factory sleeve, so the barrel and the strip gap are exposed once crimped. On a 600 V connection you finish it with heat shrink or tape per your installation standard.
5) Is the J974 a crimp lug or a mechanical set-screw lug?
Crimp. The J974 is a tubular barrel terminal, installed with a compression crimp tool sized for 1/0 to 2/0 copper. If you want a connection you can install with a hex key and re-terminate later, you need a mechanical set-screw lug instead, not this part.
6) What is the exact part number and country of origin for the Sta-Kon 7/16 ring terminal for 1/0-2/0 wire?
Manufacturer part number J974, Sta-Kon brand, made in Mexico. Specify J974 when you need the 1/0 AN to 2/0 barrel with the 7/16 bolt hole.
How fast can I get the Sta-Kon J974 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon J974 come with a warranty?
Absolutely. The Sta-Kon J974 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon J974?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon J974 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.