You may also like
NONINS TUB RNG TRM 2/0AN-3/0 BT 1/2
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 2/0AN-3/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon K975 – Frequently Asked Questions
1) What wire size does the Sta-Kon K975 ring terminal take?
The K975 is sized for 2/0 through 3/0 conductor. It's a tubular barrel lug, so the stranded conductor seats fully into the barrel before crimping. Anything smaller than 2/0 will not grip reliably in that barrel and needs a smaller lug.
2) What bolt size does the Sta-Kon K975 lug fit?
The ring tongue on the K975 is drilled for a 1/2 inch stud or bolt, so it lands directly on a 1/2 inch busbar stud, breaker lug pad, or ground bar stud without a reducing washer.
3) Can I use the Sta-Kon K975 on aluminum conductor?
It's a copper lug, so use it on copper conductor. Aluminum feeders call for a lug rated AL9CU or similar dual-rated connector; a copper-only barrel on aluminum is a connection that will degrade.
4) Is the Sta-Kon K975 terminal UL listed and what voltage is it rated for?
It carries UL file E9809 and is rated 600 V, which covers standard commercial and industrial branch and feeder work up to 600 volt systems.
5) Does this ring terminal come insulated, and do I need to cover it after crimping?
No insulation. The K975 is a bare copper barrel, so once crimped you finish it with heat shrink or tape if the termination needs covering. The upside is you can inspect the crimp and the conductor seating before you insulate.
6) Is this a compression lug or a mechanical set-screw lug?
The K975 is a crimp (compression) tubular lug, not a set-screw mechanical connector. You need a hydraulic or heavy mechanical crimp tool with a die sized for 2/0-3/0 barrels. If you'd rather terminate with a hex key and no tooling, you want a mechanical set-screw lug instead.
7) What is the ordering part number and country of origin for this Sta-Kon lug?
Order it as Sta-Kon K975. It's manufactured in Mexico, which is the detail institutional and government buyers usually need for trade-compliance paperwork.
How fast can I get the Sta-Kon K975 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon K975 come with a warranty?
Absolutely. The Sta-Kon K975 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon K975?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon K975 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.