Norton Rixson 990M Low Project...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$725.54
$416.71
Norton Rixson 990M Low Projection Wall Electromagnetic Door Holder with 1-13/16" Profile and Tri-Volt Operation

Norton Rixson 990M Low Projection Wall Electromagnetic Door Holder with 1-13/16" Profile and Tri-Volt Operation

(No reviews yet) Write a Review

Model: RIX-990M 689
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$725.54
$416.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Norton Rixson 990M Low Projection Wall Electromagnetic Door Holder with 1-13/16" Profile and Tri-Volt Operation

Professional Low-Profile Electromagnetic Door Control Solution

The Norton Rixson 990M electromagnetic door holder delivers reliable door control with an ultra-low 1-13/16" total projection for space-constrained applications. This wall-mounted unit features tri-volt operation (120VAC, 24VAC/DC, 12VDC) with 25-40 lbs. holding force and fail-safe operation that releases doors during power failure or alarm activation. ANSI/BHMA A156.15 Grade 1 certified with UL-cUL fire rating up to 3 hours for commercial door control applications.

Professional Features & Benefits

  • Ultra-Low Profile Design: 1-13/16" total projection minimizes space requirements between door and wall for tight installation areas.
  • Tri-Volt Flexibility: Standard 120VAC, 24VAC/DC, and 12VDC operation accommodates various electrical system requirements without additional transformers.
  • Reliable Holding Force: 25-40 lbs. standard holding capacity with optional 50-55 lbs. force available for heavier door applications.
  • Fail-Safe Operation: Automatic door release during power failure or alarm activation ensures safe egress and fire safety compliance.
  • Concealed Wiring Installation: Professional appearance with hidden wiring connections through standard 2" x 4" x 2-1/2" outlet box mounting.
  • Grade 1 Certification: ANSI/BHMA A156.15 Grade 1 rating ensures commercial-grade durability and performance standards.
  • Fire-Rated Construction: UL-cUL listed with CAL FIRE certification for up to 3-hour fire-rated door assemblies.
  • Manufacturer Warranty: 2-year limited warranty provides added confidence and protection for commercial installations.

Technical Specifications

  • ANSI/BHMA: ANSI/BHMA A156.15, Grade 1
  • Application: Commercial Doors
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Hand Direction: Non-Handed
  • Electronic: Yes
  • Grade: Grade 1
  • Mounting Method: Wall
  • Product Category: Door Controls
  • Product Finish: Aluminum
  • Product Group: Door Controls
  • Product Subgroup: Electromagnetic Door Holder / Releases
  • Product Type: Electromagnetic Door Holder / Releases
  • Product Voltage: 120VAC, 24VAC/DC, 12VDC
  • Subcategory: Electromechanical Closers & Holders
  • Warranty: 2 Year Limited
  • Wiring: Concealed

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm voltage (120VAC, 24VAC/DC, or 12VDC) and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including fail-safe operation per application requirements.
  6. Restore power and test all functions including normal operation, alarm/alert functions, and integration with connected systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Healthcare Facility Access Control
  • Educational Institution Safety Systems
  • Fire Safety and Emergency Egress Systems
  • Retail Loss Prevention
  • Industrial Facility Monitoring
  • Government and Municipal Buildings

Why Choose Norton Rixson Quality?

Norton Rixson electromagnetic door holders deliver professional-grade reliability with aluminum construction and ANSI/BHMA Grade 1 certification for demanding commercial applications. UL-cUL fire rating up to 3 hours and 2-year limited warranty ensure dependable performance where safety and code compliance are essential. Engineered for commercial door control applications where space constraints and reliable operation are critical requirements.

Product Specs

Condition:
New
Grade:
Grade 1
Warranty:
2 Year Limited
ANSI/BHMA:
ANSI/BHMA A156.15, Grade 1
Product Group:
Door Controls
Product Subgroup:
Electromagnetic Door Holder / Releases
Product Type:
Electromagnetic Door Closers
Subcategory:
Electromechanical Closers & Holders
Commercial/Residential:
Commercial
Electronic:
Yes
Application:
Commercial Doors
Wiring:
Concealed
Product Voltage:
120VAC, 24VAC/DC, 12VDC
Product Finish:
Aluminum
Door Hand Direction:
Non-Handed
Mounting Method:
Wall
Product Category:
Door Controls
Department:
Door Hardware

Norton Rixson RIX-990M 689 – Frequently Asked Questions

1) Will the Norton Rixson 990M door holder fit where there's almost no space between the door and the wall?
That's the reason this model exists. The 990M is a wall-mounted electromagnetic holder with 1-13/16 inch total projection, so the magnet and the armature together stick out under two inches from the wall face. If your door swings back close to the wall and a standard-projection holder would leave the door hitting the unit before the armature seats, the low-projection 990M is the one to specify. Mounting is wall only, not floor and not overhead.
2) What voltage does the Rixson 990M electromagnetic door holder run on, and do I need a separate transformer?
It's a tri-volt unit: 120VAC, 24VAC/DC, and 12VDC are all standard on the same holder. That covers a line-voltage tap, a 24V fire alarm panel output, or a 12VDC access control supply without adding a transformer to the job. Decide the voltage at the wire, not at the order form.
3) Does the 990M hold the door open or release it when the fire alarm goes off?
Fail-safe. The magnet holds the door in the open position while it's energized, and it drops the door the instant power is interrupted, either by a power failure or by the alarm system cutting the circuit. That's how a held-open door on a fire-rated assembly is allowed to work: kill the power, the door closes. It does not latch or lock the door, and it does not close the door on its own, the door closer does that once the magnet lets go.
4) Can I use an electromagnetic door holder on a fire-rated door assembly?
On this one, yes. The 990M is UL-cUL listed with CAL FIRE certification for fire-rated door assemblies up to 3 hours, and it's ANSI/BHMA A156.15 Grade 1. That combination is what a hospital or school facility engineer needs to see before a corridor door gets held open at all, since the assembly's rating has to survive the hardware attached to it.
5) What do I need to rough in before installing a Rixson 990M wall magnet?
Wiring is concealed, and it lands in a standard 2 x 4 x 2-1/2 inch outlet box behind the unit. Get that box set in the wall at the holder location and at the right height for the door before the drywall closes, and pull the correct voltage to it. If the box isn't there, you're either surface running conduit or opening the wall back up.
6) Do I have to order a left hand or right hand version of the 990M?
No handing to specify. The 990M is non-handed, so the same unit works on a left hand or right hand opening. For a property manager standardizing across a building, that means one part number covers every door regardless of swing, and one spare on the shelf covers all of them.
7) What else do I need to order to hold a door open with a 990M magnet?
The magnet only holds. The opening still needs a door closer to shut the door once the magnet releases, and it needs a power source at the correct voltage plus a connection to the fire alarm or access control circuit that will drop that power. The 990M itself is the wall magnet with its door-mounted armature; budget the closer and the low voltage run separately.
8) Should I use a wall-mounted electromagnetic door holder or a floor-mounted one?
It comes down to where the door stops and what the wall behind it is. A wall magnet like the 990M needs solid backing and a wall surface at the door's open position, and it puts the hardware at hand height where it's visible and easy to service. A floor-mounted holder is what you use when the door swings into open space with no wall behind it, or into a glass wall you can't anchor to. If the door does reach a wall but barely clears it, the 1-13/16 inch projection on the 990M is what makes the wall option work where a deeper unit wouldn't.
9) Is the 990M rated for a school or hospital corridor, or is it light duty?
ANSI/BHMA A156.15 Grade 1, the top durability tier in that standard for door holders and releases, and it's specified for commercial doors. Combined with the up to 3 hour UL-cUL fire listing, it's the class of device that goes on smoke barrier and corridor doors in healthcare and education, where the door is held open all day and has to release on alarm every time it's tested.
10) What finishes does the Norton Rixson 990M come in to match the rest of my door hardware?
Five finishes: 689 aluminum, 690 dark bronze, 691 light bronze, 693 flat black, and 696 satin brass painted. Those are painted architectural finishes, so 690 and 691 line up with bronze aluminum storefront and 693 with a black frame package. Pick the one that matches the closers and push bars already on the openings rather than the door itself.
How fast can I get the Norton Rixson RIX-990M 689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Norton Rixson RIX-990M 689 come with a warranty?
Absolutely. The Norton Rixson RIX-990M 689 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Norton Rixson RIX-990M 689?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Norton Rixson RIX-990M 689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!