You may also like
Nuts 1/4-20 Stamp Wing Nut St-zn (Jar 100)
Features
- Designed for Rapid Assembly and Disassembly by Hand
Additional Notes
- Other sizes and quantities available by request, Does not specify dimensions for #4, 7/16 and 1/2 inch diameter type-D stamped wing nuts.
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Base Diameter:
- 0.56 - 0.62
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Stamped_Wing_Nuts_St-Zn.pdf
- Number Of Holes:
- 1
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 2.7 in
- Product Length:
- 3 in
- Product Weight:
- 1.28 lbs
- Product Width:
- 3 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 20
- Thread Standard:
- ANSI/ASME B18.17
- Wing Height:
- 0.44 - 0.50
- Wing Spread:
- 1.05 - 1.11
- Wing Thickness:
- 0.21 - 0.25
- Department:
- Electrical
- Product Subgroup:
- Nuts
- Product Type:
- Stamped Wing Nut
- Type2:
- Stamped Wing Nut
- Series:
- JWN
- Product Finish:
- Zinc
- Product Details:
- Stamped Wing Nut
- Product Material:
- Steel
Metallics JWN6 – Frequently Asked Questions
1) What thread size does the Metallics JWN6 wing nut take?
The JWN6 is a 1/4-20 wing nut, so it threads onto 1/4 inch bolts, rod, or studs with 20 threads per inch (standard UNC coarse thread for that diameter). It is made to ANSI/ASME B18.17 for stamped wing nuts.
2) Will a 1/4-20 stamped wing nut clear tight conduit or strut runs?
Check the wing spread first. The JWN6 measures 1.05 to 1.11 inches across the wings, with a wing height of 0.44 to 0.50 inches and a base diameter of 0.56 to 0.62 inches. If you have less than about an inch and an eighth of swing room beside the bolt, you cannot turn it by hand and a standard hex nut is the better call.
3) Are these wing nuts strong enough for load-bearing hardware, or just hand-tight work?
Stamped wing nuts like the JWN6 are formed from sheet steel, not machined like a forged or hex nut, and the wings are 0.21 to 0.25 inches thick. They are intended for rapid assembly and disassembly by hand, meaning covers, guards, access panels, temporary holds, and ground or bonding jumpers you expect to take off again. For anything torqued to a value or carrying structural load, use a hex nut instead.
4) Do Metallics JWN6 wing nuts qualify for Buy American or ARRA-funded projects?
No. The JWN6 is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your job carries a domestic-sourcing requirement, this part will not satisfy it.
5) Can Metallics JWN6 wing nuts be used outdoors or in damp locations?
They are zinc-plated steel. Zinc plating handles indoor and sheltered damp conditions, but it is not a stainless or hot-dip finish, so direct weather exposure, washdown areas, or coastal and corrosive atmospheres will eventually rust them. For those, specify a stainless fastener.
6) How many wing nuts come in a JWN6 jar, and can I order a smaller count?
The JWN6 ships as a jar of 100 pieces, and 100 is the order minimum, so one jar is the smallest buy. The filled jar weighs 1.28 lbs. Other sizes and quantities are available by request.
How fast can I get the Metallics JWN6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JWN6 come with a warranty?
Absolutely. The Metallics JWN6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JWN6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JWN6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.