NUVO Lighting 60-6123 Sherwood, 3 Light, Vanity, 24in, Iron Black with Brushed Nickel Accents

No. The Sherwood vanity is rated for indoor damp locations only, which covers a normal bathroom ceiling or wall above a vanity where it gets humidity but no direct spray. It is not wet-location rated, so keep it out of shower enclosures and directly over a tub. It is cULus safety listed and wall mounted.

No. The Sherwood 60-6123 is listed as non-dimmable, so it should be run on a standard single-pole or 3-way switch at 120V. If a dimmable bath bar is what the spec calls for, choose a different fixture rather than wiring this one to a dimmer.

Three 40W incandescent lamps ship with the fixture. Replacements are E26 medium base, 120V, 40W, in a T9 tubular shape. Total fixture load is 60W. If you want to go LED later, any 120V E26 lamp that fits the clear glass holder will work physically, but note the fixture is not dimmable.

No. The Sherwood vanity is not ADA compliant, and with an 8.63 inch extension from the wall it exceeds the 4 inch projection limit that ADA-compliant wall fixtures are built to. For an accessible-route wall in a government, healthcare, or education project, specify a fixture marked ADA compliant instead. Mounted above a vanity top rather than in a circulation path, projection is usually not the governing issue, but that is a call for the project's code authority.

480 lumens total from the three included 40W incandescent lamps, with a CRI of 100 and an average rated lamp life of 3000 hours. That is soft, warm, accurate-color light suited to grooming and makeup, but it is well below what an LED bath bar of the same size delivers. For a primary bathroom light in a large room, plan on additional ceiling light. The 3000 hour lamp life also means more frequent relamping in high-traffic multi-family or hospitality bathrooms.

The Sherwood 60-6123 comes in one finish only: iron black with brushed nickel accents, with clear glass. It is a contemporary two-tone, so it reads with black-framed mirrors and shower trim while the nickel accents tie to brushed nickel faucets. If you are standardizing a property on a single metal, a two-tone fixture is harder to match than a solid finish. The Sherwood collection name is what to search if you want matching pieces in the same family.

The Sherwood is a wall-mounted vanity fixture with clear glass shades on an iron black steel body with brushed nickel accents. Installation orientation depends on the shade geometry shown on the fixture itself, so follow the NUVO instruction sheet in the carton. What the specs do fix is the mounting type: wall only, over a standard 120V junction box.

The fixture weighs 6.9 lbs, well within what a standard wall-mounted device box or fixture box supports, so no fan-rated or heavy-duty box is required. The mounting hardware supplied with the fixture is what attaches it to the box; the fixture is steel bodied and wall mount only.

Yes, lead is the Prop 65 listed chemical declared for the 60-6123. The fixture is RoHS compliant and cULus safety listed. If you are shipping into California or submitting to an institutional purchasing office, the lead warning is the disclosure to pass along with the submittal.