NUVO Lighting 62-1214 11in, Flush Mounted LED Fixture, CCT Selectable, Square, White Acrylic

Yes for a bathroom ceiling or a laundry room. The 62-1214 carries a damp location rating and is listed for indoor use, so it handles the humidity of a bath, laundry, or covered utility area. It is not rated for wet locations, so skip open exterior spots exposed to rain or direct spray.

One part number covers the range. The 62-1214 is CCT selectable, so the color temperature is set at the fixture during install rather than chosen at order time. For a property manager standardizing hallways, closets, and baths across a building, that means a single SKU on the shelf and consistent appearance once each fixture is set to the same position.

The 62-1214 is a dimmable 120V LED fixture, so it is intended to run on a dimmer. Because the LED driver is integrated and draws only 16W, pair it with an LED-rated (forward-phase/ELV as the driver requires) dimmer rather than an old incandescent-only dimmer, which usually has a minimum load far above 16 watts and will flicker or buzz.

No. The light source is an integrated LED with no socket or lamp base, so there is nothing to relamp. It is rated at 50,000 average hours, and at the end of life the whole fixture gets swapped. For MRO buyers that trades relamping labor for eventual fixture replacement, which is usually the point in high-ceiling or hard-to-reach locations.

Both. The mounting method is listed as ceiling/wall, so the 11 inch square fixture can be surface mounted on a wall as well as close to the ceiling. Overall it projects 3.25 inches from the mounting surface, which matters in a tight hallway or a stairwell wall.

In most closets, halls, baths, and small utility rooms, yes. The 62-1214 draws 16W and puts out 990 to 1100 lumens depending on the selected color temperature, which is in the range of a single 75W incandescent. For a 10x12 bedroom or larger it works as general ambient light with lamps added, not as the sole high-output source.

CRI is 90, which is above the 80 CRI typical of utility-grade LED fixtures and is the threshold usually specified where color rendering matters, such as patient rooms, exam areas, and retail back-of-house. Combined with CCT selectability it lets you match color appearance to adjacent fixtures.

Steel housing with a white acrylic diffuser. The steel base resists the dents and flexing that bend thin spun-aluminum pans during handling, and the acrylic lens will not shatter like a glass shade, which is why this utility-style square reads well in multi-family turns, corridors, and storage rooms.