NUVO Lighting 62-1217 14in, Flush Mounted LED Fixture, CCT Selectable, Square, White Acrylic, with Sensor

The 62-1217 is rated for damp locations and listed as an indoor fixture, so a bathroom, laundry room, or enclosed porch ceiling is within its rating. It is not a wet-location fixture, so skip anything exposed to direct water or weather. Safety listing is cETLus.

No. The 62-1217 is a non-dimmable integrated LED fixture, so it needs to be fed from a standard on/off circuit at 120V. Putting it on an existing dimmer leg will cause flicker or buzz. If you are replacing a dimmed fixture, change the dimmer out for a standard single-pole switch or pick a dimmable model instead.

It is CCT selectable, so one part number covers multiple color temperatures set at the fixture. For a property manager that means you can stock a single SKU and match the color of whatever corridor, closet, or utility area you are relamping instead of carrying several warm/cool versions. CRI is 90, so colors render close to the existing fixtures in finished spaces.

The 62-1217 is a sensor fixture, so it switches itself on occupancy rather than relying on the wall switch. Wire it to constant 120V power and leave the switch closed, or in stairwells and storage rooms you can feed it from an unswitched circuit entirely. Because the fixture is not dimmable, do not put a dimmer upstream of it.

The 62-1217 puts out 1230 to 1330 lumens on 20.5W at 120V, which output varies with the color temperature you select. That is in the range of a single mid-size ceiling fixture: workable for a hallway, closet, small bath, laundry, stair landing, or utility room up to roughly a bedroom footprint. For a large open room or a garage you would want more than one.

It measures 14.00 inches long by 14.00 inches wide with a 3.25 inch height, squared off with a white acrylic lens. The 14 inch square footprint covers a standard 4 inch octagon or round ceiling box and most patched openings left behind by an older drum or pan fixture. At 2.2 lbs it is light enough for a standard box-mounted installation.

Yes, the 62-1217 is rated for ceiling or wall mounting, so the same fixture works as a close-to-ceiling light or as a square wall-mounted unit in a stairwell or corridor. With a sensor built in, wall mounting at head height often gives better occupancy coverage than a ceiling position in a narrow space.

No. The LED is integrated, with no lamp base and no replaceable bulb, so the whole fixture is the serviceable unit. Rated life is 50,000 hours, so in a corridor running 12 hours a day that is on the order of a decade before replacement. MRO buyers planning spares should stock fixtures, not lamps.

The base is steel with a white acrylic diffuser, and the fixture is finished in white. The styling is utility grade rather than decorative, which is what you want for back-of-house, storage, stairwell, and multi-family common areas where fixtures take abuse. It is RoHS compliant.

Yes, lead is the listed Prop 65 chemical for the 62-1217. If you are specifying into a California project or a facility with its own chemical disclosure requirements, note it on the submittal.