NUVO Lighting 62-1213 14in, Acrylic Round, Flush Mounted, LED Light Fixture, CCT Selectable with Microwave Sensor, White Finish, 120V

Yes. The 62-1213 is rated for ceiling or wall mounting, so it works for stairwells, corridors and utility rooms where a wall-mounted sensor fixture makes more sense. It's a 14 inch round with a 3.55 inch height, so it sits close to the surface either way.

It carries a damp location rating and is listed for indoor use, so a bathroom, laundry or interior stairwell is fine. Do not put it anywhere exposed to direct water or weather, such as an open soffit or an uncovered exterior wall. Safety listing is cETLus.

No. The 62-1213 is non-dimmable. Wiring it to a dimmer can cause flicker or damage the driver. It runs on a standard 120V line at 20.5W, and light level is controlled by the built-in microwave occupancy sensor rather than a wall dimmer, so plan for a plain switched or unswitched hot.

One part number covers the color options: the 62-1213 is CCT selectable, so the color temperature is chosen at the fixture instead of by ordering a different SKU. That's useful across a multi-family or hotel property because you stock a single item and still match the existing corridor color. It ships in White finish only.

Output runs 1230 to 1330 lumens depending on the CCT setting, drawing 20.5W, with a CRI of 90 for accurate color rendering. That's roughly comparable to a single mid-size ceiling fixture, so one unit suits a laundry room, closet, small hallway or stairwell landing. For a larger garage or corridor run, space multiple units.

No bulbs to buy. The LED array is integrated into the fixture, rated at 50,000 average hours, so there is no lamp base and nothing to relamp. When the LEDs reach end of life the whole fixture is replaced. For MRO buyers that removes lamp stocking entirely, but it also means you cannot swap a lamp to change output.

The fixture weighs 1.82 lbs, so a standard listed ceiling outlet box carries it with no extra bracing. The body is steel with an acrylic round diffuser, 14 inches across and 3.55 inches deep.

The sensor is built into the 62-1213, so the fixture switches itself on when it detects motion instead of relying on a wall switch or a separate occupancy sensor. Microwave detection sees through the acrylic lens and reacts to movement rather than heat, which is why these get specified in stairwells, storage rooms, back-of-house corridors and garages where lights are routinely left burning. If you want manual or dimmed control, pick a non-sensor fixture instead, since this one is not dimmable.

The fixture is RoHS compliant. It does carry a California Proposition 65 notice for lead, which is routine for metal lighting housings and relevant if you are shipping into or specifying for California projects.