NUVO Lighting 62-1781 Blink Pro Plus, 32W, 5.5 in. x 36 in, Surface Mount LED, CCT Selectable, 90 CRI, Rectangular Shape

Yes. The 62-1781 is a universal 120V/277V fixture, so the same part works on a 120V residential or light commercial branch circuit and on a 277V commercial lighting circuit. That means one SKU covers mixed-voltage buildings instead of stocking two.

It is a flat panel: 35.97 inches long, 5.61 inches wide, and only 1.06 inches deep off the surface. At just over an inch of projection it works in corridors, closets, stairwells and low-ceiling areas where a drum or wrap fixture would hang too low. Fixture weight is 4.41 lbs, so standard ceiling anchors into a box or into the deck carry it easily.

It carries a damp location rating and is listed for indoor use, so a bathroom ceiling, laundry room, or covered interior area with humidity is fine. It is not a wet location fixture, so do not use it in an open exterior soffit, inside a shower spray zone, or anywhere exposed to direct water.

The fixture is CCT selectable, so the color temperature is set on the fixture itself rather than ordered as a separate part number. For a property manager standardizing across a building, that means one fixture can be matched to warmer lobby areas and cooler back-of-house areas without stocking multiple SKUs. It also delivers 90 CRI, which is high enough for retail display, healthcare and hospitality spaces where color rendering matters.

It carries a cETLus safety listing, which covers both US and Canadian requirements, so it satisfies inspection on commercial work in either country. It is also RoHS compliant. Note the California Prop 65 disclosure for lead on this fixture, which matters for institutional and government procurement paperwork.

The 32W Blink Pro Plus is dimmable with an integrated LED driver, so no separate ballast or remote driver is required. The LED module is integrated and not a replaceable lamp, so pair it with an LED-rated dimmer rather than a legacy incandescent control.

Output is 2100 to 2300 lumens from 32 watts, with the range depending on the CCT setting chosen. That is a general-ambient level suitable for corridors, stairwells, utility rooms and small offices. For high-ceiling or task-critical areas you will want multiple units or a higher-lumen fixture.

The light source is an integrated LED, not a socketed lamp, so there is nothing to relamp. Average rated life is 50,000 hours, and at end of life the fixture itself is swapped. For MRO planners that means no lamp inventory to carry, but the unit should be budgeted as a fixture replacement rather than a lamp line item.

The stated mounting method for the 62-1781 is ceiling, surface mounted. It is a close-to-ceiling edge lit panel, so plan it as a ceiling application rather than a wall sconce or a recessed can replacement.

One finish is offered: black. The body is die-cast aluminum, which helps the driver and LEDs shed heat in a fixture this shallow. If a building standard calls for white trim, this particular part number will not match it.