NUVO Lighting 62-1780 Blink Pro Plus, 24W, 5.5 in. x 24in, Surface Mount LED, CCT Selectable, 90 CRI, Rectangular Shape

Yes. The Blink Pro Plus 62-1780 is a 120V/277V fixture, so the same part number works on residential-style 120V branch circuits and on 277V commercial lighting circuits. That is useful when you are standardizing one SKU across a building that runs 277V in corridors and 120V in back-of-house.

Color temperature is field selectable on the fixture itself, so you order one part number (62-1780) and set the CCT at install. Practically that means a property manager can stock a single item and still match whatever the other ceilings in the building are running. Light quality is 90 CRI, which is high enough for retail display, healthcare, and anywhere skin tones and finishes need to read correctly.

Bathrooms and other damp interior spaces, yes. The Blink Pro Plus 62-1780 is rated for damp locations and listed as an indoor fixture, so it is fine over a shower area ceiling, in a laundry, or in a kitchen. It is not a wet-location fixture, so keep it out of anywhere exposed to direct rain or spray, including open exterior soffits and canopies.

Surface mount to the ceiling only. The Blink Pro Plus 62-1780 is a close-to-ceiling edge-lit panel that fastens to the ceiling surface; there is no recessed or grid-drop application for it. If your ceiling is a 2x4 acoustic grid and you want the fixture flush with the tile, you need a lay-in troffer or a panel built for grid, not this fixture.

The 24 watt Blink Pro Plus delivers 1600 to 1750 lumens depending on the CCT setting you pick. That output range from 24 watts is in the territory of a two-lamp fluorescent strip or a 100W incandescent-class ceiling fixture, so it is a common one-for-one swap on corridor, closet, laundry, and small-office ceilings.

The fixture measures 23.98 inches long by 5.61 inches wide and projects only 1.06 inches off the ceiling. That low profile is what makes it work in tight-headroom spots, stairwell landings, and closets where a drum or wraparound would hang too low. At 2.89 lbs it is light enough to mount to a standard ceiling outlet box without extra bracing.

It dims, so you can put it on a dimmer for corridors and conference rooms. There is no lamp to change: the LED is integrated into the fixture, rated for 50,000 hours average life. When the board eventually goes, the fixture gets replaced rather than relamped, which is the tradeoff on every integrated LED panel.

The fixture carries a cETLus safety listing, which covers both US and Canadian installation, and it is RoHS compliant. That is typically what a facilities or institutional spec asks for on a surface mount LED. Note the California Prop 65 disclosure on this item lists lead.