NUVO Lighting 62-560 Pi, 14in LED Flush Mount, Brushed Nickel Finish, Frosted Etched Glass, CCT Selectable, 120V

The Pi 14 inch LED flush mount carries a damp location rating and is listed for indoor use, so it works in a bathroom ceiling, covered laundry room, or similar humid indoor space. Damp is not wet rated, so keep it out of direct spray and off open exterior ceilings. Safety listing is cETLus.

The Pi flush mount is CCT selectable, so one fixture covers three color settings chosen at install rather than stocking separate SKUs. Output shifts slightly with the setting: 2100 lumens on the first setting and 2200 lumens on the other two. CRI is 90, which is high enough for corridors and residential spaces where skin tones and finishes need to read correctly.

No separate lamps. The LED is integrated into the fixture, rated 50,000 average hours, so there is nothing to relamp over the life of the unit. The tradeoff for an MRO or property buyer is that the whole fixture is the replacement item when the LED reaches end of life.

At 14.35 lbs the Pi flush mount is on the heavy side for a ceiling fixture because the body is steel with a frosted etched glass diffuser. Confirm the existing ceiling box is secured to framing and rated for the fixture weight before hanging it; a loose remodel box on drywall tabs is not adequate.

At roughly 2100 to 2200 lumens from 25W, the Pi works as a single primary ceiling source for a bedroom, hall, bath, or small kitchen of modest size. For larger open rooms, plan two or more fixtures spaced across the ceiling rather than relying on one 14 inch unit.

Yes. Lead is listed as a CA Prop 65 chemical for the Pi flush mount. The fixture is also RoHS compliant, which matters to institutional and sustainable-distribution buyers tracking restricted substances.