NUVO Lighting 62-568 Pi, 9in LED Flush Mount, Black Finish, Frosted Etched Glass, CCT Selectable, 120V

Pi 62-568 is CCT selectable, so you pick the color temperature at the fixture rather than ordering a separate SKU per Kelvin. Output tracks the setting: 1500, 1700, and 1600 lumens across the three positions, from an 18W integrated LED. CRI is 90, which matters if you are lighting a corridor or unit where color rendering is part of the spec.

Diameter is 9 inches and overall height is 3.13 inches, so it projects just over three inches off the ceiling, which works in hallways, closets, and low-clearance stairwells. The 9 inch round canopy covers a standard 4 inch octagon or round ceiling box. It mounts to the ceiling and runs on 120V line voltage.

No. The light source is an integrated LED, included with the fixture, with no socket and no replaceable lamp. Average rated life is 50,000 hours, so for an MRO or property-management program you are replacing the whole fixture at end of life rather than relamping. If your maintenance standard requires a serviceable lamp, specify a flush mount with a medium base socket instead.

Yes, the Pi flush mount is dimmable. Because it is an integrated LED driver on 120V and not a lamp, pair it with a dimmer rated for LED loads; older incandescent-only dimmers are the usual cause of flicker or buzz on a fixture like this. At 18W the load is small, so a single dimmer will carry several of them.

Each one puts out 1500 to 1700 lumens depending on the color temperature you select, roughly comparable to a 100W incandescent, with the frosted etched glass spreading it rather than throwing a spot. One unit handles a typical bedroom, bathroom, or small office; for corridors space them on a run rather than relying on a single fixture.

Black is the finish offered on the 62-568, paired with frosted etched glass in the Pi collection's transitional styling. For California work, note the Prop 65 chemical disclosure for lead. The fixture is RoHS compliant.