NUVO Lighting 65-063 LED Entrance Light, 26W, Bronze Finish, 120-277V

The 65-063 is a universal-voltage fixture rated 120V-277V, so it drops onto 120, 208, 240 or 277 volt lighting circuits without a separate driver selection. That is what makes it usable on multi-family and commercial panels where corridor and entry lighting often runs at 277V.

Yes. The 65-063 is an outdoor fixture with a Wet location rating, so it can go on an exposed building face, entry alcove or stairwell wall with direct rain exposure. It is also cULus safety listed.

Plan on 8.66 inches wide by 12.28 inches high, with a 5.81 inch extension off the wall. The 5.81 inch projection is the number to check against doorway clearances and walkway paths. Fixture weight is 1.96 lbs, so it mounts to a standard wall box without supplemental bracing.

No. The 65-063 is non-dimmable. It needs to run on a straight switched or contactor-controlled circuit, or be switched by a photocell or timeclock ahead of the fixture. If the spec calls for 0-10V or line-voltage dimming, this is the wrong fixture.

No. The 65-063 is not ADA compliant, and it projects 5.81 inches from the wall. Where a fixture sits in a circulation path between 27 and 80 inches above the floor and has to meet protruding-object limits, use an ADA-rated low-projection fixture instead.

Nothing to buy. The LED array is integrated into the fixture, so there is no socket and no replaceable lamp. Average rated life is 35,000 hours. When the array reaches end of life the whole fixture is replaced, which is the normal trade-off on integrated LED wall packs versus a lamped fixture.

The 65-063 puts out 1691 lumens at 26W, which suits a single entry door, a stairwell landing or a service door where you want the opening lit and identifiable. It is not a parking-area fixture. For lot or driveway coverage you want a higher-lumen area light or flood rather than a 1691 lumen entrance unit. Color rendering is 70+ CRI, typical for utility-style outdoor lighting.

No, CCT is fixed on the 65-063. It is not a selectable-CCT fixture, so every unit you order will match the next one straight out of the box. If you are standardizing a building and need to match an existing run of entry lights, order the same model rather than relying on a field switch.

Wall mount only. The 65-063 is built as a wall pack and mounts flat to a vertical surface over an outlet box. It is not a pole-mount or pendant fixture, so for pole-top or arm-mount applications you need a dedicated area light with the matching mounting arm.

The housing is aluminum with a bronze finish, which is the standard combination for wet-location exterior wall packs. Bronze is the only finish offered on the 65-063, so for a building where entries need to match, every unit lands the same.

The 65-063 is RoHS compliant, and it carries a California Prop 65 listing for lead. Institutional and government buyers who track Prop 65 disclosures on submittals should note the lead listing in their documentation.