NUVO Lighting 65-796R2 200W UFO LED High Bay, 5000K, 28800 Lumens, 120-277V, White Finish

Yes. The 65-796R2 accepts any line voltage from 120V through 277V, so it drops onto 120, 208, 240 or 277 volt circuits without a separate driver selection. It ships with a 6 foot whip (72 inch leads) for the line-side connection.

A locking hanging hook and a 6 foot power whip are both in the box, so for a straightforward pendant or chain hang from an existing hook point you are covered. The fixture mounts pendant hanging or surface. If you are hanging from structure you will still need your own chain, aircraft cable or threaded rod and the hook point itself. At 6.42 lbs the fixture is light enough for standard single-point suspension.

The 65-796R2 carries a wet location rating and is cULus safety listed, so moisture exposure is not a problem for the housing. It is classified as an indoor fixture, so use it in wet indoor spaces (wash bays, coolers, covered docks) rather than as an open-sky exterior luminaire.

Each 65-796R2 puts out 28,800 lumens at 200 watts, which is the output band typically used to swap out a 400W metal halide high bay one for one. Color is 5000K daylight with 80 CRI, so it reads cool and neutral in a shop or warehouse. The fixture is fixed at 5000K, not field-selectable CCT, so if you need 4000K in the same building you need a different model.

The 200W 65-796R2 is a dimmable fixture, so it can be tied into a dimming control scheme rather than switched only. The LED module is integrated, so there is no lamp to swap and all control happens at the driver and the circuit.

It measures 13.39 inches in diameter and 8.11 inches tall. Add the length of whatever chain, cable or rod you hang it on when you are figuring finished mounting height against sprinkler heads, crane rails and door swings.

No. The LED source is integrated into the fixture, so there is no lamp or ballast to stock or change. Rated life is 50,000 hours, which is the number to use when you are budgeting maintenance for a facility on a fixed lift schedule.

The body is die-cast aluminum in a white finish, which is what carries heat away from the LED module in a high bay with no fan. Die-cast aluminum plus the wet location rating makes it suitable for dusty, humid industrial spaces. The fixture is also RoHS compliant.

Yes, lead is the listed Prop 65 chemical for this fixture. Institutional and government purchasers who track Prop 65 on submittals should carry that on the spec package.