NUVO Lighting 65-798R2 240W UFO LED High Bay, 5000K, 34560 Lumens, 120-277V, White Finish

The NUVO 65-798R2 UFO high bay accepts any input from 120V to 277V, so it lands on 120, 208, 240 or 277 without changing drivers or ordering a different part number. That is what makes it practical to standardize one fixture across a building where the shop floor is on 277 and an adjacent space is on 120.

It ships with a locking hanging hook and a 6 foot whip, so for a standard pendant drop off a threaded rod, chain or a J-hook in the deck you only need the overhead support and the junction connection. The whip is 72 inches of conductor, which is what sets how far the fixture can sit below your feed point before you add a box. Mounting method is pendant hanging surface.

The 65-798R2 carries a wet location rating and is cULus safety listed, so damp and wet indoor environments like wash bays, food processing rooms and unheated storage are within its rating. It is classified as an indoor fixture, so do not use it in open-air exterior applications even though the wet rating would otherwise suggest it.

Dimming is supported on the 65-798R2, so it can be driven down by a control system rather than switched on and off only. That matters in a warehouse running occupancy-based aisle control or daylight harvesting near skylights. The fixture is not CCT selectable, so the color temperature is fixed at the 5000K it ships as.

No. The LED is integrated into the fixture, so there is no lamp or base to change. When the light source reaches end of life you replace the whole unit. Rated life is 50,000 hours, which at 12 hours a day, 6 days a week comes out to well over a decade of service before that point.

It weighs 6.42 lbs, light enough for a single-point hook or rod drop at the bar joist without supplemental framing. Body diameter is 13.39 inches and overall height is 8.11 inches, so check that clearance against sprinkler heads and rack tops before you set your drop length.

5000K is a cool, daylight-toned white and 80 CRI is the standard color rendering for industrial and warehouse work, fine for picking, packing, shop and garage tasks where you need crisp contrast. If the space involves color matching, paint or print inspection, you want a higher CRI fixture instead. The color temperature here is fixed, not field selectable.

Die-cast aluminum. That is the thermal path for the driver and LEDs in a fixture pushing 240 watts, and it holds up better than molded housings in a shop or plant where things get bumped by lifts and lull booms. The unit is also RoHS compliant.

Yes. Lead is the listed Prop 65 chemical for this fixture. If you are procuring for a California facility, that warning needs to flow through to your submittal and receiving documentation.

White, and that is the only finish offered on this model. The white housing helps a bit with interreflected light off a light-colored deck, and it matches cleanly in retail backrooms and gyms where the fixture is visible from the floor.