NUVO Lighting 65-844 LED Area Light Type III, 200W, Bronze Finish, 4000K, 120-277V

Yes. The 65-844 ships with a 2-3/8 inch slip-fitter mount, which is the standard tenon size on most square and round poles and on bullhorn arms. If your pole has a drill-pattern arm plate instead of a tenon, you need an arm mount adapter, because the slip-fitter is what comes in the box.

Wet location rated and cULus certified, so it can go on an open pole, a bullhorn, or an exposed building face with direct rain exposure. The housing is die-cast aluminum, and the fixture is RoHS compliant.

The 65-844 is fixed at 4000K neutral white with 80 CRI; it is not CCT selectable, so there is no field switch to move it to 3000K or 5000K. If the rest of your lot is 5000K you will see a visible color difference, and you would need a different fixture ordered at that color temperature.

Type III throws light forward and to the sides in an asymmetric pattern, so it is used along the perimeter of a parking lot, down a drive aisle, or on a building edge where the pole sits at the side of the area being lit. If your pole stands in the middle of a lot or a courtyard and you need light thrown evenly in all directions, a Type V (square or round symmetric) distribution is the right choice instead. The 65-844 is the Type III version at 200W.

The 65-844 puts out 26,051 lumens at 200 watts, which is in the range typically used as a one-for-one swap for a 400W metal halide or high pressure sodium area light, since those lose a large share of their initial output over life. Confirm the replacement against a photometric layout for your pole heights and spacing, since Type III aims light forward and to the sides rather than straight down.

The fixture is dimmable, so it can be driven down for curfew or late-night setback through a compatible control. The LED board is integrated and not field replaceable, so plan the control around the driver rather than around swapping lamps.

It measures 22.40 inches by 14.40 inches by 3.11 inches and weighs 8.42 lbs. That is light enough for a single installer on a lift, but you still need the fixture's effective projected area checked against the pole's wind load rating when you are hanging several heads on one pole.

The only thing included with the 65-844 besides the fixture is the 2-3/8 inch slip-fitter mount. Dusk-to-dawn operation has to come from a separate control, whether that is a pole or panel mounted photocell, a contactor, or a time clock.

Rated average life is 50,000 hours. The LED is integrated, with no lamp base and no removable lamp, so at end of life the fixture is replaced rather than relamped. For MRO buyers standardizing a lot, that means the spare you stock is the whole head.

Yes. Lead is listed as the Prop 65 chemical of concern for the 65-844, so the fixture carries that warning for California shipments. It is also RoHS compliant.

Bronze is the finish on the 65-844, which is the usual match for bronze or dark bronze poles and bullhorn arms already in most commercial lots. The housing underneath is die-cast aluminum.